Fujitsu P300 user manual Connecting External Devices, Connecting cables, Disconnecting cables

Page 23

■Connecting External Devices

CAUTION

Do not connect or disconnect cables during a thunderstorm.

Always take hold of the actual plug. Never unplug a cable by pulling the cable itself. Connect and disconnect the cables in the order described below.

With the exception of USB devices, always remove all power plugs before connecting external devices!

Read the documentation on the external device before connecting it.

Connecting cables

Turn off all power and equipment switches.

Pull all power plugs out of grounded mains outlets.

Connect all cables at the system unit and peripherals. You must observe the information provided in the chapter "Important notes".

Plug all data communication cables into the utility sockets.

Plug all power cables into the grounded mains outlets.

Disconnecting cables

Turn off all power and equipment switches.

Pull all power plugs out of grounded mains outlets.

Unplug all data communication cables from the utility sockets.

Disconnect all cables from the system unit and peripherals.

USB devices are hot-pluggable. This allows cables from USB devices to be connected and disconnected with the system switched on.

Additional information can be found in the documentation for the USB devices.

8

Image 23

Contents Deskpower P300 Series User’s Manual Important Safety Instructions Iii For Safe Operation Before reading this manualBacking Up the Data Using this Product for High-Safety ApplicationsMicrosoft Service Pack Notational conventions Conventions Used in This ManualIntroduction Energy saving SafetyImportant Notes Manufacturer’s notesFCC Class B Compliance Statement Transporting the PC Cleaning the PCCleaning the system unit and the monitor Cleaning the keyboard and the mouseReference to products Disposal and recyclingXii Before Reading This Manual Organization of This ManualContents System Expansions Technical DataChapter External devices Steps for Initial SetupPreparing for Use Unpacking and Checking the DeliveryConnect the Monitor, Mouse and Keyboard Setting Up the PCConnecting the keyboard Connecting standard keyboardConnecting USB mouse Connecting the mouseConnecting a PS/2 mouse Notch for inserting the screwdriver Connecting the PC to the Mains VoltageDevices with main power switch Devices without main power switchSwitching on monitor and PC Initial Switch-on Software will be InstalledInstalling the software Disconnecting cables Connecting External DevicesConnecting cables Connections on the system unit LANSettings of the parallel port Connecting external devices to the serial portConnecting external devices to the parallel port Settings of the serial portOperation Operation Switching On the PCOn devices with main power switch On devices without main power switchSwitching Off the PC Floppy disk indicator Indicators on the PCHard disk indicator Power-on indicatorKeyboard Point Working with Floppy Disks Floppy DisksAnti-theft protection Settings in Bios SetupAccess Protection Under Windows Property and Data ProtectionBios Setup Security Functions Troubleshooting Tips Internal power supply overloaded Troubleshooting and TipsInstalling New Software Mains voltage supply is faultyScreen stays blank Wrong RAM modules have been inserted No Mouse Pointer Displayed on the ScreenFloppy Disk Cannot be Read or Written Wrong monitor has been set under Windows 2000/XPOut of system resources PC cannot be switched off with the power buttonTime and/or Date is Not Correct TipsPage System Expansion Information about boards System ExpansionsClosing the casing Opening the casingTake the new board out of its packaging Installing and removing a boardInstalling a board Page Removing a board Page Removing slot adapter Installing an Additional Serial PortLow-Profile boards Mounting slot adapterRemoving a hard disk drive Installing and Removing the Hard Disk DrivesInstalling a hard disk drive Replacing Lithium Battery Page Technical Data List of Specifications Technical DataDimensions Weight Environmental conditions Electrical Data