Fujitsu P300 Low-Profile boards, Installing an Additional Serial Port, Mounting slot adapter

Page 48

■Low-Profile boards

For units with a particularly low overall height, there are so-called low-profile boards with a slot cover with a lower overall height to match the low-profile units. To also install these low-profile boards in normal board slots, you must mount a corresponding slot adapter beforehand.

2

Mounting slot adapter

Fit the slot adapter on the slot cover of the low-profile board (1) and screw it on (2).

Now you can install the low-profile board in a suitable slot like a normal board (see the chapter "Installing board").

1

Removing slot adapter

Unscrew the screw (1) and remove the slot adapter (2).

■Installing an Additional Serial Port

An additional serial interface can be installed in a rear slot cover plate like a board. The condition is that the system board has a free internal serial port.

Connect the cable of the additional serial port to the connector on the system board.

34

Image 48

Contents Deskpower P300 Series User’s Manual Important Safety Instructions Iii Before reading this manual For Safe OperationUsing this Product for High-Safety Applications Backing Up the DataMicrosoft Service Pack Conventions Used in This Manual IntroductionNotational conventions Safety Important NotesManufacturer’s notes Energy savingFCC Class B Compliance Statement Cleaning the PC Cleaning the system unit and the monitorCleaning the keyboard and the mouse Transporting the PCDisposal and recycling Reference to productsXii Organization of This Manual Before Reading This ManualContents Technical Data System ExpansionsChapter Steps for Initial Setup Preparing for UseUnpacking and Checking the Delivery External devicesSetting Up the PC Connecting the keyboardConnecting standard keyboard Connect the Monitor, Mouse and KeyboardConnecting the mouse Connecting a PS/2 mouseConnecting USB mouse Connecting the PC to the Mains Voltage Devices with main power switchDevices without main power switch Notch for inserting the screwdriverInitial Switch-on Software will be Installed Switching on monitor and PCInstalling the software Connecting External Devices Connecting cablesDisconnecting cables LAN Connections on the system unitConnecting external devices to the serial port Connecting external devices to the parallel portSettings of the serial port Settings of the parallel portOperation Switching On the PC On devices with main power switchOn devices without main power switch OperationSwitching Off the PC Indicators on the PC Hard disk indicatorPower-on indicator Floppy disk indicatorKeyboard Point Floppy Disks Working with Floppy DisksSettings in Bios Setup Access Protection Under WindowsProperty and Data Protection Anti-theft protectionBios Setup Security Functions Troubleshooting Tips Troubleshooting and Tips Installing New SoftwareMains voltage supply is faulty Internal power supply overloadedScreen stays blank No Mouse Pointer Displayed on the Screen Floppy Disk Cannot be Read or WrittenWrong monitor has been set under Windows 2000/XP Wrong RAM modules have been insertedPC cannot be switched off with the power button Time and/or Date is Not CorrectTips Out of system resourcesPage System Expansion System Expansions Information about boardsOpening the casing Closing the casingInstalling and removing a board Installing a boardTake the new board out of its packaging Page Removing a board Page Installing an Additional Serial Port Low-Profile boardsMounting slot adapter Removing slot adapterInstalling and Removing the Hard Disk Drives Removing a hard disk driveInstalling a hard disk drive Replacing Lithium Battery Page Technical Data Technical Data List of SpecificationsDimensions Weight Electrical Data Environmental conditions