Fujitsu P300 user manual Important Notes, Safety, Manufacturer’s notes, Energy saving

Page 8

Important Notes

In this chapter you will find information regarding safety which is essential to take note of when working with your PC. The manufacturer's notes contain helpful information on your PC.

￿Safety

CAUTION

During installation and before operating the device, please observe the instructions on environmental conditions in the chapter entitled "Technical data" as well as the instructions in the chapter "Preparing for Use".

Please check whether the device is correctly set for the local power supply (see "Preparing for Use" chapter).

The main switch and the ON/OFF switch do not disconnect the system unit from the mains voltage. To completely disconnect the mains voltage, remove the power plug from the grounded mains outlet.

Replace the lithium battery on the system board in accordance with the instructions in the "System expansions - Replacing lithium battery" chapter.

Caution: components in the system can get very hot.

￿Manufacturer’s notes

Keep this operating manual together with your device. If you pass on the device to third parties, you should include this manual.

￿Energy saving

When the PC is delivered, some energy-saving functions are already set

￿If you are not using your PC, switch it off.

￿In the BIOS Setup you may set further energy-saving functions for the PC.

￿Depending on the operating system, you can set additional power-management features.

Energy saving under Windows 2000/XP

The Screen Saver tab allows you to set energy-saving functions for your screen. Select the following item in the menu: Start → Settings → Control Panel → Display → Display Properties → Screen Saver → Energy saving features of monitor.

With the default setting Control Panel → Power Options → Advanced additional power management features of Windows 2000/XP are available.

viii

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Deskpower P300 Series User’s Manual Important Safety Instructions Iii Before reading this manual For Safe OperationUsing this Product for High-Safety Applications Backing Up the DataMicrosoft Service Pack Notational conventions Conventions Used in This ManualIntroduction Safety Important NotesManufacturer’s notes Energy savingFCC Class B Compliance Statement Cleaning the PC Cleaning the system unit and the monitorCleaning the keyboard and the mouse Transporting the PCDisposal and recycling Reference to productsXii Organization of This Manual Before Reading This ManualContents Technical Data System ExpansionsChapter Steps for Initial Setup Preparing for UseUnpacking and Checking the Delivery External devicesSetting Up the PC Connecting the keyboardConnecting standard keyboard Connect the Monitor, Mouse and KeyboardConnecting USB mouse Connecting the mouseConnecting a PS/2 mouse Connecting the PC to the Mains Voltage Devices with main power switchDevices without main power switch Notch for inserting the screwdriverInitial Switch-on Software will be Installed Switching on monitor and PCInstalling the software Disconnecting cables Connecting External DevicesConnecting cables LAN Connections on the system unitConnecting external devices to the serial port Connecting external devices to the parallel portSettings of the serial port Settings of the parallel portOperation Switching On the PC On devices with main power switchOn devices without main power switch OperationSwitching Off the PC Indicators on the PC Hard disk indicatorPower-on indicator Floppy disk indicatorKeyboard Point Floppy Disks Working with Floppy DisksSettings in Bios Setup Access Protection Under WindowsProperty and Data Protection Anti-theft protectionBios Setup Security Functions Troubleshooting Tips Troubleshooting and Tips Installing New SoftwareMains voltage supply is faulty Internal power supply overloadedScreen stays blank No Mouse Pointer Displayed on the Screen Floppy Disk Cannot be Read or WrittenWrong monitor has been set under Windows 2000/XP Wrong RAM modules have been insertedPC cannot be switched off with the power button Time and/or Date is Not CorrectTips Out of system resourcesPage System Expansion System Expansions Information about boardsOpening the casing Closing the casingTake the new board out of its packaging Installing and removing a boardInstalling a board Page Removing a board Page Installing an Additional Serial Port Low-Profile boardsMounting slot adapter Removing slot adapterInstalling and Removing the Hard Disk Drives Removing a hard disk driveInstalling a hard disk drive Replacing Lithium Battery Page Technical Data Technical Data List of SpecificationsDimensions Weight Electrical Data Environmental conditions
Top Page Image Contents