Fujitsu M3099GH, M3099GX, M3099EX, M3099EH manual Operation status, Power-on

Operation status

Operation status is indicated by the following message:

<Power-on>	When the lamps are ready to read, the screen changes to the initial
	screen of the simplex or duplex reading mode.
	W a r m i n g	_	u p	N o w ! !

<Warning>	X X	X X X	X X	X	X X X
		I	N K	E M P T	Y

The upper line displays the current read mode for front-side reading. The lower line is blinking and displays the ink empty of print head after the scanning operation.

This warning display will be reset, when the covers are opened, or Stop is pressed, or Start command is issued. The operator must change the print head and reset the life counter. (See Chapter 6

ENDORSER.)

<Reading counter>	Example of simplex reading:
	S F	A 4

4 0 0	L .	>
	X X	X

Reading counter

The reading counter is displayed after a read operation starts.

The reading counter disappears when:

•The next scanning starts.

•The valid switches are pressed.

•The error is cleared.

1-8