Fujitsu M3099GH, M3099GX, M3099EX, M3099EH manual Specifications

Specifications

This section describes the specifications of the endorser.

Refer to Reference Guide about information on adjusting the print head position and replacing the print head.

The following table lists the endorser specifications.

Item	Specification
Printing method	Ink jet printing method
Characters	Alphabet : A to Z, a to z
	Number : 0, 1, to 9
	Symbol : ! “ # $ % & ‘ ( ) *
	+ - . / : ; < = > ? @ [¥] ^ _ -{}
	(blank)
Maximum number	20
of characters
Character size	2. 9 x 1.5mm
	(0.11 in x 0.06 in)(height x width)
Character pitch	Approx. 2.54 mm (0.1 in)
Print area	Back-side of the document
	A ≥ 5 mm (0.2 in)
	B ≥ 28 mm (1.1 in)
	C ≥ 20 mm (0.79 in)
	D ≥ 5 mm (0.2 in)

Center of the		Read reference
document		position
	B		A
direction	Back side	ABC•••••	C
Feed		ST
			D

6-1