Fujitsu M3099GX, M3099GH, M3099EX, M3099EH manual If you press

3 If you press the	Mode 2	at Sccreen 9,	<Screen 10>
you return to screen 8.
The setting is stored to EEPROM.
If you press the	Mode 2	at screen 10,

you go to screen 11. (Screen 12 in case of M3099GH/GX)

I P C - 2 S E T

X

4 If you press the Mode 1 at screen 11/12, IPC-2 pre-set mode can be not used. Also the setting is changed to “No” obligatory and stored to EEPROM. If you press the Mode 2 at screen 11/12, IPC-2 pre-set mode can be used and the setting number is stored to EEPROM. When you close the setup mode, press

Stop .

<Screen 11>

P a n e l / H o s t S e t I g n o r e

N o - M o d e 1 Y e s - M o d e 2

<Screen 12>

H o s t S e t I g n o r e

N o - M o d e 1 Y e s - M o d e 2

<Classification of user’s paper>

User’s paper are classified in line-art scanning as follows:

The horizontal axis shows the background density/color of paper. The vertical axis shows the density of charcter/ line.

		Background density		Background color
		Normal←	→Dark	Red	Green	Blue
	Normal	q: Normal background	e: Dark background
	−	and character.	and normal-density
			character.
Character
density
	↓	w: Normal background		r:Light character	t: Light character
	Light	and light character.		on red paper.	on green paper.

q- t are the pattern number set in setup mode.

7-5