Setting Product-ID (M3099GX/GH)
When you set
1 | In Screen 2, press Mode 1 13 times to display |
| |
2 | Press Mode 2 to display Screen 29. |
(The default setting is “M3099GH” in case of M3099GH and “M3099G”in case of M3099GX.)
3 In Screen 29, press 
to select Product-
ID. Each time is pressed, M3099G, M3099GH or M3096G apear in case of M3099GH, and M3099G or M3096G at each
time you press 
in case of M3099GX.
4 Press Mode 2 to display Screen 28. The settings are stored in EEPROM.
5When you close the setup mode, press
Stop .
<Screen 28>
< < S E T U P M O D E > >
P R O D U C T - I D S E T
<Screen 29>
P R O D U C T - I D S E T
X X X X X X
Setting picking start time
When you set the picking start time, you must set as follows:
1 In Screen 2, press 13 times (14 times for M3099GX/GH) to display PICK START TIMER screen. <Screen 30 >
2 Press 
to display Screen 31. (The default setting is 1 second.)
3 In Screen 31, press 
until the digit you want to change blinks. Then press 
until the value you want to select appears. (The selectable range is from 0.2 to 29.8 seconds in steps of 0.2 seconds.)
4 Press Mode 1 and Mode 2 at the same time to display Screen 30.
The settings are stored in EEPROM.
5When you close the setup mode, press
Stop .
<Screen 30>
< < S E T U P M O D E > >
P I C K S T A R T T I M E R
<Screen 31>
P I C K S T A R T T I M E R X X . X S
(Blinking)