Husky HME-423E, HME-421E Smtp Configuration, Email Alert, Smtp Server IP, Sender, Authentication

Configuration Using a Web Browser

4-6.7.2 SMTP Configuration

This feature allows the administrator to set up the mail server IP, mail account, account password, and forwarding email account for receiving the event alert.

Email Alert	This feature is to enable or disable the email alert function.
SMTP Server IP	This feature is to set up the mail server IP address (when Email Alert
	enabled, this function will then be available).
Sender	Type in an alias of the switch in complete email address format, e.g.
	switch101@123.com, to identify where the e-mail alert comes from.
	Check the box to enable and configure the email account and password
Authentication	for authentication (when Email Alert is enabled, this function will then be
	available).
	This feature is to set up the email account, e.g. johnadmin@123.com, to
Mail Account	receive the alert. It must be an existing email account on the mail server,
	which you set up in SMTP Server IP Address column.
Password	Use this feature to set up the email account password.
Confirm Password	To reconfirm the password.
Rcpt e-mail Address 1-6	This feature is to assign up to 6 e-mail accounts which will also receive
	the alert.
After finishing necessary configurations, click on Apply to save the settings.

4-11