Husky HME-423E, HME-421E user manual Table of Contents

Table of Contents
Chapter 1 Introduction	1-1
1-1 Overview	1-1
1-2 Product Features	1-1
1-3 Package Checklist	1-2
Chapter 2 Hardware Installation	1-1
2-1 Dimensions and Panel Layout	2-1
2-2 LED Indicators	2-2
2-3 RJ-45 Ports	2-2
2-3.1 RJ-45 Pin Assignments	2-2
2-4 Fiber Ports	2-3
2-5 Installing Your Ethernet Direct Switch	2-4
2-5.1 Mounting The Switch	2-4
2-5.2 Wiring The Power Inputs	2-5
2-5.3 Wiring The Fault Alarm Contact	2-6
2-5.4 Cabling	2-6
Chapter 3 Configuration Using Console Interface	3-1
3-1 Connecting Console Port	3-1
3-2 Login The Console Interface	3-1
3-3 CLI Management	3-1
3-4 Command Levels	3-2
Chapter 4 Configuration Using a Web Browser	4-1
4-1 About Web-based Management Interface	4-1
4-2 Preparing for Web-based Management	4-1
4-3 System Login	4-1
4-4 Management Main Screen	4-2
4-5 Basic Settings	4-2
4-5.1 System Information	4-2
4-5.2 Port Statistics	4-3
4-5.3 User Authentication	4-3
4-5.4 Fault Relay Alarm	4-4
4-5.5 IP Configuration	4-4
4-5.6 Updating Firmware by TFTP	4-5
4-5.7 Restoring Configurations by TFTP	4-5
4-5.8 Backing up Configurations by TFTP	4-5
4-5.9 Saving Configuration Files	4-6
4-5.10 Factory Default	4-6
4-5.11Rebooting System	4-6
4-6 Advanced Management Settings	4-6
4-6.1 Port Control	4-6
4-6.2 Rate Limiting	4-7
4-6.3 Port Mirroring	4-8
4-6.4 DHCP Server	4-8
4-6.5 DHCP Client	4-9
4-6.6 Port and IP Bindings by DHCP Server	4-9