Using the EMM-E6 Hub View
BRIM Ports
BRIM ports E and F will display status colors (green for ON, blue for OFF) for any installed BRIM modules, along with the BRIM type (FDDI, WAN, etc.).
Bridge Port Status Displays the current administrative status of bridge ports A, B, C, and D: ON (green) or OFF (blue). This display will always be the same regardless of the Port Display Form selected for MIM ports. Click mouse button 1 to toggle the ports ON or OFF.
AUI Redundancy
If you have configured and enabled a redundant circuit for the front panel Channel D ports, their current redundancy status — Active or Inactive — will be displayed. If no redundant circuit has been enabled for these ports, the boxes will remain uncolored and DIS (disabled) will be displayed. Note that these boxes only display the ports’ redundancy status, not their link or admin status.
EMM-E6 Menu
Click mouse button 3 on the Module Type box to access the
Bridge Port State
Displays the current bridging state for channels A, B, C, and D: Learning (yellow; the port is monitoring network traffic, learning network addresses); Listening (yellow; the port is monitoring BPDU traffic on the network while preparing to move to the Forwarding state); Forwarding (green); Blocking (red); or DIS (blue; port status is OFF).
Figure 2-4. EMM-E6 Ports
Using the Mouse in a Hub View Module
Each media interface module, or MIM, installed in the
Using the Hub View |