Link/Seg Traps
Configuring Link/Seg Traps for the Repeater
To enable or disable Link and Segmentation traps for all ports on a repeater:
1.In the Repeater Link/Seg Traps window, click mouse button 1 on the repeater interface for which you would like to configure link and segmentation traps.
2.Click mouse button 1 on ; the Channel X Link/Seg Traps window, Figure
Figure 4-2. Channel X Link/Seg Traps Window
3.In the Link Traps field, click mouse button 1 on the appropriate selection to Enable or Disable link traps for the repeater.
4.In the Segmenting Traps field, click mouse button 1 on the appropriate selection to Enable or Disable segmenting traps for the repeater.
5.Click mouse button 1 on to save your changes; the current status will be displayed in each field to the right of the field name. Click on to exit the window.
Viewing and Configuring Link/Seg Traps for Hub Modules
To enable or disable Link and Segmentation traps for all ports on the selected hub module or modules:
1.In the Repeater Link/Seg Traps window, select a repeater interface in the scroll list.
2.Click mouse button 1 on ; the module traps window, Figure
Enabling and Disabling Link/Seg Traps |