Chapter 5
Repeater Redundancy
This chapter describes how to configure and enable redundant circuits
Setting Network Circuit Redundancy
The redundancy application gives you the ability to define redundant circuits for your
NOTE |
Before you configure redundancy, make sure that only the primary physical link is connected to the network. If a backup port is connected before you configure and enable redundancy, you create a data loop.
To open the main Repeater Redundancy window
from the icon:
1.Click on the appropriate
2.Drag down to Redundancy and release.
from the Hub View:
1.Click on to display the Device menu.
2.Drag down to Redundancy and release.