Using the EMM-E6 Hub View
•OOW
For error type descriptions, see Checking Statistics on page
Protocols
Displays a percentage for each active port that represents what portion of that port’s traffic is of a particular protocol type. You can display any one of the following protocol types:
•IP
•OSI
•XNS
•DECNet
•Novell
•Appletalk
•Banyan
•Cabletron
•Other
Frame Sizes
Displays a percentage for each active port that represents what portion of that port’s traffic is of a specific size, measured in bytes. You can display any one of the following frame sizes:
•Runts (packets with fewer than 64 bytes)
•
•
•
•
•
•Giants (packets with more than 1518 bytes)
NOTE |
For the statistical port display form options listed above, three dashes
Port Type
Provides the following administrative information about the port:
•Admin/Link Status indicates the connection status of the port:
-ON indicates that the port has a valid link signal or does not support a link signal.
-OFF indicates that the port has been turned off through management action.
-NLK (No Link) indicates that the port does not have a link to a device at the other end of the cable, or that there is no cable attached.
Monitoring Hub Performance |