Chapter 3 Component Replacement
3.2.4 Replace a Rectifier
Figure 3-9 Removing a Rectifier
1
2
124787
Step 4 Grasp the handle and gently pull the module out and away from the shelf.
Caution The rectifier module may be hot when being pulled from the shelf. To avoid personal injury, wait until the rectifier has cooled before removing from the system shelf.
Step 5 Continue to pull the rectifier until it is halfway out of the shelf. Grasp the bottom of the rectifier with one hand and continue using the other hand to pull the rectifier out.
Step 6 Pull the rectifier out of the shelf. The system will generate a communication error, which will last until a new rectifier is inserted.
Step 7 For information on installing a rectifier module, see the “2.3.1 Install the Rectifiers” procedure on page
Cisco AC/DC Power System User Guide, R1.0
| May 2006 |
| |
|
|