Cisco Systems IE301016S8PC manual Rack-Mounting the Switch

Page 14

Cisco IE 3010 Switch Getting Started Guide

1

Mid-mounting position

3

Cable-side mounting position

 

 

 

 

2

Number-8 Phillips flat-head

4

Power-supply-side mounting

 

screws

 

position

 

 

 

 

Rack-Mounting the Switch

Use the four number-12 Phillips machine screws to attach the brackets to the rack. Use the black Phillips machine screw to attach the cable guide to the left or right bracket.

Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.

If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006

Warning For mounting railway-application equipment and for EN50155 standard compliance, the switch must be installed only in a rack mid-mounting position. If you install the switch in a front rack-mounting (cable side or power supply side) position or in a wall-mounting position, a mechanical failure can occur that results in the switch becoming detached from the rack. Statement 403

 

Cisco IE 3010 Switch Getting Started Guide

14

78-19582-02

Image 14
Contents Cisco IE 3010 Switch Getting Started Guide About this Guide Box Contents Running Express Setup Troubleshooting 207181 Troubleshooting Cisco IE 3010 Switch Getting Started Guide 78-19582-02 Switch USB Console Port Managing the SwitchSwitch RJ-45 Console Port Installing the Switch Equipment That You NeedBefore You Begin Installation Warning Statements 140F 60C StatementAttaching the Brackets Rack-Mounting the Switch 208334 Wiring the Power Source Grounding the Switch119626 Connecting to the Power Source AC 5 A, DC 15 A. StatementInch 6.8 mm Cisco IEE 208338 Connecting the Switch Ports 10/100 or 10/100/1000 PortsSFP-Module Ports Verify Port ConnectivityTroubleshooting Express SetupAccessing Help Online Obtaining Documentation and Submitting a Service RequestResetting the Switch to the Default Settings For More Information