Cisco Systems IE301016S8PC manual Connecting to the Power Source, AC 5 A, DC 15 A. Statement

Page 18

Cisco IE 3010 Switch Getting Started Guide

Connecting to the Power Source

Prepare the power cable.

Warning This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. Statement 1028

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than:

AC: 5 A, DC: 15 A. Statement 1005

Step 1 Locate the switch power-input terminal.

The terminal screws are labeled on the power-input terminal cover.

AC power:

Identify the line and neutral AC-power terminal screws. The line terminal screw is labeled L, and the neutral terminal screw is labeled N.

DC power:

Identify the positive and negative DC-power terminal screws. The positive terminal screw is labeled +, and the negative terminal screw is labeled –.

Note The terminal screws for power-supply module 1 are on the side labeled PSU1, and the terminal screws for power-supply module 2 are on the side labeled PSU2. Make sure that you connect the wires to the correct terminal screws.

100-

 

 

 

240V~, 50-

 

 

 

60Hz, 2A

100-

 

 

 

240V~, 50-

 

 

 

60Hz, 2A

 

5

 

 

 

2A

5

 

 

 

2A

 

 

 

 

10A

 

 

 

 

 

10A

207221

Step 2 Locate the AC and DC circuit breakers, turn them OFF, and tape them in the OFF position.

Note Do not connect the switch to a power source that has an ON/OFF switch.

 

Cisco IE 3010 Switch Getting Started Guide

18

78-19582-02

Image 18
Contents Cisco IE 3010 Switch Getting Started Guide About this Guide Box Contents Running Express Setup Troubleshooting 207181 Troubleshooting Cisco IE 3010 Switch Getting Started Guide 78-19582-02 Managing the Switch Switch RJ-45 Console PortSwitch USB Console Port Installing the Switch Equipment That You NeedBefore You Begin Installation Warning Statements 140F 60C StatementAttaching the Brackets Rack-Mounting the Switch 208334 Wiring the Power Source Grounding the Switch119626 Connecting to the Power Source AC 5 A, DC 15 A. StatementInch 6.8 mm Cisco IEE 208338 Connecting the Switch Ports 10/100 or 10/100/1000 PortsSFP-Module Ports Verify Port ConnectivityTroubleshooting Express SetupObtaining Documentation and Submitting a Service Request Resetting the Switch to the Default SettingsAccessing Help Online For More Information