Cisco IE 3010 Switch Getting Started Guide
SFP-Module Ports
Step 1 Grasp the module on the sides, and insert it into the switch slot until you feel the connector snap into place.
Step 2 Connect an appropriate cable to the module port. Insert the other cable end into the other device.
Cisco | 208339 |
IE 3010 |
|
Cisco | 208340 |
IE 3010 |
|
For a list of supported modules, see the release notes on Cisco.com. For detailed instructions on installing, removing, and connecting to SFP modules, see the SFP module documentation.
Verify Port Connectivity
After you connect the switch port and another device, the port LED turns amber while the switch establishes a link. This process takes about 30 seconds, and then the LED turns green. If the LED turns off, the target device might not be turned on, there might be a cable problem, or there might be a problem with the adapter in the target device.
|
| Cisco IE 3010 Switch Getting Started Guide |
|
|
|
|
| ||
|
|
| 23 | |
|
|
|