Cisco Systems IE301016S8PC manual Cisco IEE

Step 7 Loosen the terminal screw, and slide the spade terminal under the screw and washer.

Note Use the appropriate terminal screws, depending on whether you are installing a high-voltage (AC or DC) or a low-voltage (DC) power supply.

Step 8 AC power:

Insert the line wire into the terminal screw labeled L and the neutral wire into the terminal screw labeled N.

Make sure that you cannot see any wire lead. Only wire with insulation should extend from the terminal screw.

Cisco IE 3010 Switch Getting Started Guide

20

Cisco IE 3010 Switch Getting Started Guide

Cisco IEE 3010

208336

Cisco IEE 3010

78-19582-02