Cisco Systems IE301016S8PC manual Obtaining Documentation and Submitting a Service Request

Page 25

Cisco IE 3010 Switch Getting Started Guide

Resetting the Switch to the Default Settings

Caution Resetting the switch deletes the configuration and restarts the switch.

1.Press and hold the Express Setup button for about 10 seconds. The switch reboots. The system LED turns green after the switch completes rebooting.

2.Press the Express Setup button again for 3 seconds. A switch 10/100 Ethernet port blinks green.

3.Follow Steps 6 to 13 in the “Running Express Setup” section on page 4.

Accessing Help Online

First look for a solution in the troubleshooting section of the switch hardware installation guide or the switch software configuration guide on Cisco.com. You can also use the Cisco Technical Support and Documentation site for a list of known hardware problems and extensive troubleshooting documentation.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.

 

 

Cisco IE 3010 Switch Getting Started Guide

 

 

 

 

 

 

78-19582-02

 

 

25

 

 

 

Image 25
Contents Cisco IE 3010 Switch Getting Started Guide About this Guide Box Contents Running Express Setup Troubleshooting 207181 Troubleshooting Cisco IE 3010 Switch Getting Started Guide 78-19582-02 Switch RJ-45 Console Port Managing the SwitchSwitch USB Console Port Equipment That You Need Installing the SwitchBefore You Begin 140F 60C Statement Installation Warning StatementsAttaching the Brackets Rack-Mounting the Switch 208334 Grounding the Switch Wiring the Power Source119626 AC 5 A, DC 15 A. Statement Connecting to the Power SourceInch 6.8 mm Cisco IEE 208338 10/100 or 10/100/1000 Ports Connecting the Switch PortsVerify Port Connectivity SFP-Module PortsExpress Setup TroubleshootingResetting the Switch to the Default Settings Obtaining Documentation and Submitting a Service RequestAccessing Help Online For More Information