SHC1300_booklet
Installation | Audio Connections | |
|
|
|
English
Headphone battery replacement (figure 3)
1Open the headphone’s battery compartment.
2Take out the batteries and dispose of them properly.
3Insert new batteries.
4Make sure the batteries are correctly inserted as indicated by the engraved symbols in the battery compartment.
Basic operation
When the IR transmitter is connected to a headphone output of an audio source.
1Switch on your IR transmitter and place it at the same height or slightly higher than the reception height of the IR headphone.
2Position the LED’s towards the listening area, ensuring that there are no obstacles in between transmitter and headphone.
5Close the battery compartment.
Audio Connections
Connecting the FM transmitter to a headphone output of an audio source (figure 4)
1Connect the 3.5 mm stereo plug of the stereo audio cable to the headphone output of an audio source, such as TV, HiFi or PC.
– In case your audio source has a 6.3 mm headphone output, use the supplied 3.5 mm to 6.3 mm stereo adapter plug.
2Switch on your audio source and carefully increase the volume of the audio source.
3Switch on the headphone and the transmitter.
4Adjust the volume to the desired level with the headphone volume control.
3Switch on the headphone.
4Switch on your audio source and carefully increase the volume of the audio source.
5Adjust the volume of the IR headphone to the desired level with the headphone volume control.
IMPORTANT
Because IR light travels in a straight line, place the IR transmitter at the same height, or slightly higher than the reception height of the IR headphone.
High IR light content such as sunlight and bright incandescent indoor lighting may degrade the audio signal and cause interference. If you experience such problems, simply move the system to a darker area.
6