Cisco Systems 274, 474 manual Wave Inline Network Adapter, Inline Network Adapter Description

C H A P T E R 4

WAVE Inline Network Adapter

This chapter describes the Cisco WAVE inline network adapter and contains the following sections:

•Inline Network Adapter Description, page 4-1

•Ports and LED Indicators, page 4-3

•Inline Network Adapter Cabling Requirements, page 4-4

•Installation Scenarios and Cabling Examples for Fast Ethernet Connections, page 4-7

For adapter specifications, see Table A-2in Appendix A, “Wide Area

Virtualization Engine Hardware Specifications”.

Inline Network Adapter Description

The WAVE-274 and WAVE-474 appliances include one 2-port Gigabit Ethernet inline network adapter.

The Cisco WAVE inline network adapter provides inline traffic interception capability for your appliance. When you configure the WAVE appliance for inline interception mode, you can set attributes to control which interfaces are to be used over which VLANs. By default, the adapter operates on all inline-capable interfaces and VLANs. You can configure the inline redirection feature using the WAAS CLI or the WAAS Central Manager GUI.

	Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide
OL-17739-01		4-1