Cisco Systems 474, 274 manual A-4

Page 74

Appendix A Wide Area Virtualization Engine Hardware Specifications

Appliance Specifications

Table A-1	WAVE-274 and WAVE-474 Features and Specifications (continued)

Specification		Description

Size		•	Height: 3.94 in. (10.0 cm)
		• Depth: 15.0 in. (38.0 cm)
		• Width: 13.4 in. (34.0 mm)

Weight		18.6 lb (8.4 kg) typical

Ports		•	USB: 6 USB 2.0 (2 front, 4 rear)
		• Console: 2 RS232 serial ports individually configurable to power
			5 V and 12 V. COM1 can be configured for 5 V, 9 V, and 12 V
		•	Parallel: 1
		•	PS/2: 2
		•	Video: 1
		• Audio: 2, line in and line out
		•	NIC: RJ-45
		• Inline Network Adapter: 2 (see Inline Adapter Specifications,
			page A-4)

Power		•	Operating Voltage Range: 90 to 264 VAC
		• Rated Voltage Range: 100 to 240 VAC
		• Rated Line Frequency: 50/60 Hz
		• Operating Line Frequency Range: 47 – 63 Hz
		• Rated Input Current: 5 A @ 90 VAC (3.5 A at 90 VAC with 80%
			efficient power supply)
		• Heat Dissipation: typical 273 btu/hr (69 kg-cal/hr), maximum 1024
			btu/hr (258 kg-cal/hr)
		• Power Supply Fan: 80 mm variable speed fan

	Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide
A-2	OL-17739-01

Image 74

Contents November Page Page Page N T E N T S Wave Inline Network Adapter Altitude Viii Preface PurposeChapter Title Description AudienceOrganization Conventions Convention DescriptionXii Xiii Xiv Preface Xvi Xvii Related Documentation XviiiXix OL-17739-01 Introducing the Cisco Wide Area Virtualization Engine Supported ProductsHardware Features Front Panel Controls and LEDsLocation of Ports and Connectors Color State DescriptionBack Panel LEDs and Connectors Ethernet Port Connector Console Port Serial Connector Preparing to Install the Wide Area Virtualization Engine Safety WarningsOL-17739-01 OL-17739-01 Safety Guidelines General PrecautionsOL-17739-01 System Reliability Considerations Protecting Against Electrostatic Discharge OL-17739-01 Installing the Wide Area Virtualization Engine Installing the Wave Appliance on a Tabletop Installing the Wave Appliance on a WallWAVE-274 and WAVE-474 Appliance Mounting Sleeve Attaching the Mounting Sleeve Installing the Wave Appliance in an Equipment Rack Rack-Mounting ConsiderationsRack Requirements Connecting CablesConnecting Power and Booting the System Checking the LEDs Removing or Replacing a Wave ApplianceOL-17739-01 Wave Inline Network Adapter Inline Network Adapter DescriptionOL-17739-01 Ports and LED Indicators LEDs State DescriptionInline Network Adapter Cabling Requirements Connection Required CableConnection Required Cable Cable Requirements for Wave Connections Using Fast Ethernet Wave Inline Network Adapter Mgmt WAN Cabling Between Two Inline WAVEs OL-17739-01 Troubleshooting the System Hardware Identifying System Problems Checking Connections and Switches Troubleshooting the Ethernet Controller Network Connection ProblemsEthernet Controller Troubleshooting Chart Ethernet Controller Problem ActionsUndetermined Problems Problem-Solving Tips Symptoms and Solutions Symptom Cause and Action See the Undetermined Problems section on Symptom FRU or Action Power-On Self Test Post Post OverviewPost Numeric Codes and Text Messages Control Panel Message Description Power-On Self Test Post Interpreting Post Diagnostic Front Panel LEDs and Beep Codes Post Diagnostic Front Panel LEDs and Beep Codes OL-17739-01 Post Diagnostic Front Panel LEDs and Beep Codes OL-17739-01 Appliance Specifications Specification DescriptionA-4 Specification Description Inline Adapter Specifications Maintaining the Wide Area Virtualization Engine Maintaining Your Site EnvironmentTemperature Humidity AltitudeElectrostatic Discharge Dust and ParticlesCorrosion Electromagnetic and Radio Frequency Interference MagnetismPower Source Interruptions Shock and VibrationUsing Power Protection Devices Surge ProtectorsUninterruptible Power Supplies Line ConditionersD E IN-2 IN-3 IN-4