Cisco Systems Cisco ONS 15454 SDH manual Reboot Activity Active TCC2 LEDs Standby TCC2 LEDs

Page 12

Chapter 4 Turn Up Node

DLP-D249 Provision IP Settings

Table 4-1 LED Behavior During TCC2 Reboot

Reboot Activity

Active TCC2 LEDs

Standby TCC2 LEDs

 

 

 

 

Standby TCC2 card updated with new

ACT/STBY: Flashing green.

1.

ACT/STBY: Flashing yellow.

network information.

 

 

2. FAIL LED: Solid red.

 

 

 

 

 

 

3. All LEDs on except ACT/STBY.

 

 

 

4.

CRIT turns off.

Memory test (1 to 2 minutes).

 

 

5. MAJ and MIN turn off.

 

 

 

 

 

 

6. REM, SYNC, and ACO turn off.

 

 

 

7. All LEDs except A&B PWR:

 

 

 

 

turn off (1-2 minutes)

 

 

 

8.

ACT/STBY: Solid yellow.

 

 

 

9.

Alarm LEDs: Flash once.

If an AIC or AIC-I card is installed,

 

 

10.

ACT/STBY: Solid green.

AIC FAIL and alarm LEDs light up

 

 

 

 

briefly when the AIC is updated.

 

 

 

 

The standby TCC2 becomes the active

 

 

 

 

TCC2.

 

 

 

 

 

 

 

 

 

1.

All LEDs: Turn off (1 to 2 minutes).

ACT/STBY: Solid green

 

 

CTC displays “Lost node connection,

 

 

 

 

switching to network view” message.

 

 

 

2.

FAIL LED: Solid red.

 

 

Memory test (1 to 2 minutes).

3.

FAIL LED: Flashing red.

 

 

4.

All LEDs on except ACT/STBY.

 

 

 

 

 

 

5.

CRIT turns off.

 

 

 

6.

MAJ and MIN turn off.

 

 

 

7.

REM, SYNC, and ACO turn off; all

 

 

 

 

LEDs are off.

 

 

 

8.

ACT/STBY: Solid yellow.

 

 

 

9.

ACT/STBY: Flashing yellow.

 

 

TCC2 updated with new network

10.

ACT/STBY: Solid yellow.

 

 

information.

 

 

 

 

TCC2 becomes the standby TCC2.

 

 

 

 

 

 

 

 

 

Step 5 Click OK. The network view appears. The node icon appears in gray, during which time you cannot access the node.

Step 6 Double-click the node icon when it becomes green. As necessary, complete the “DLP-D65 Create a Static Route” task on page 4-15or the “DLP-D250 Set Up or Change Open Shortest Path First Protocol” task on page 4-16. If you do not need to create a static route or set up OSPF, continue with the “NTP-D28 Set Up Timing” procedure on page 4-22 .

 

Cisco ONS 15454 SDH Procedure Guide, R4.6

4-12

January 2004

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Turn Up Node Before You BeginNTP-D24 Verify Card Installation Install Cards and Fiber-Optic CableStop. You have completed this procedure NTP-D30 Create Users and Assign Security DLP-D74 Create a New User-Single NodeDLP-D75 Create a New User-Multiple Nodes Purpose Required/As NeededClick the Provisioning General tabs Confirmation dialog box, click Yes NTP-D279 Set Power Monitor Thresholds Node view, click the Provisioning General Power Monitor tabsNTP-D169 Set Up CTC Network Access DLP-D249 Provision IP Settings Click the Provisioning Network tabsCisco ONS 15454 SDH Procedure Guide, R4.6 Reboot Activity Active TCC2 LEDs Standby TCC2 LEDs Slot-0 Status=IpAddress Next Done Mod DLP-D65 Create a Static Route Cisco ONS 15454 SDH Reference ManualDLP-D250 Set Up or Change Open Shortest Path First Protocol Click the No Authentication buttonType- Choose Simple Password January DLP-D251 Set Up or Change Routing Information Protocol NTP-D27 Set Up the ONS 15454 SDH for Firewall Access Iiop port Port Function NTP-D28 Set Up Timing DLP-D68 Provision the Iiop Listener Port on the CTC ComputerDLP-D69 Set Up External or Line Timing Stop . You have completed this procedureUnframed , FAS , FAS + CAS DLP-D70 Set Up Internal Timing NTP-D170 Create Protection Groups Type Cards Description and Installation Requirements DLP-D71 Create a 11 Protection Group DLP-D72 Create a 1N Protection Group Click the Provisioning Protection tabsDLP-D73 Create a 1+1 Protection Group DLP-D252 Create a Y-Cable Protection Group Creating a Y-Cable Protection GroupNTP-D34 Set Up Snmp Box FigureCreating an Snmp Trap Without Proxy January

Cisco ONS 15454 SDH specifications

Cisco Systems has long been a leader in networking and telecommunications, and one of its notable products is the Cisco ONS 15454 SDH (Synchronous Digital Hierarchy) system. Designed to support a wide range of networking applications, this platform is particularly suited for the transportation of voice, data, and video across metropolitan and wide area networks.

One of the main features of the Cisco ONS 15454 is its modular architecture, allowing for flexible configurations to meet varying demands. This flexibility enables service providers and enterprises to scale their networks as needed, easily adding or removing modules without significant downtime. The system can accommodate multiple technologies, including SONET, SDH, and wavelength-division multiplexing (WDM), making it an excellent solution for diverse environments.

Another critical characteristic of the ONS 15454 is its high-capacity transport capabilities. It can handle up to 400 Gbps in a single chassis, enabling operators to manage larger amounts of data traffic efficiently. This scaling is crucial for meeting the ever-increasing requirements for bandwidth in modern networks, especially with the rise of cloud services and video streaming.

Furthermore, the Cisco ONS 15454 supports various interface options, including Ethernet, TDM, and fiber channel, enabling operators to adapt the system to their existing infrastructures. This compatibility simplifies integration with legacy systems, allowing for a smoother transition to more advanced technologies.

Cisco has also placed a strong emphasis on network management and operational efficiency with the ONS 15454. Integrated management tools provide real-time monitoring and diagnostics, facilitating proactive maintenance and reducing operational costs. The system is designed for high reliability, featuring built-in redundancy and failover capabilities to ensure continuous service availability.

The ONS 15454's versatility extends to its support for various service types, ranging from basic voice services to complex data applications. It can effectively create service level agreements (SLAs) and prioritize traffic, enhancing the quality of service for critical applications.

In conclusion, the Cisco ONS 15454 SDH platform stands out for its modular design, high capacity, adaptability to different technologies, and robust management capabilities. It serves as a reliable backbone for network operators seeking to future-proof their infrastructures while addressing the dynamic demands of modern communication services. With Cisco's reputation for quality and innovation, the ONS 15454 remains a preferred choice for service providers looking to enhance their network capabilities.
Top Page Image Contents