Cisco Systems Cisco ONS 15454 SDH manual Iiop port

Page 20

Chapter 4 Turn Up Node

DLP-D67 Provision the IIOP Listener Port on the ONS 15454 SDH

Step 3 If the CTC computer resides behind a firewall, complete the “DLP-D68 Provision the IIOP Listener Port on the CTC Computer” task on page 4-22 .

Figure 4-6shows a CTC computer and ONS 15454 SDH behind firewalls. For the computer to access the ONS 15454 SDH, you must provision the IIOP port on the CTC computer and on the

ONS 15454 SDH. Each firewall can use a different IIOP port.

Figure 4-6 CTC Computer and ONS 15454 SDH Nodes Residing Behind Firewalls

IIOP port

Private

network

CTC computer

Port

filtering

Protected network

 

IIOP port

Firewall

Firewall

Unprotected

ONS 15454 SDH

Private

network

network

 

 

 

 

 

IIOP port

 

 

 

 

 

 

Port

 

 

 

 

filtering

ONS 15454 SDH

External network

 

Protected network

61330

 

 

 

Stop. You have completed this procedure.

DLP-D67 Provision the IIOP Listener Port on the ONS 15454 SDH

Purpose

This task sets the IIOP listener port on the ONS 15454 SDH, which enables

 

you to access ONS 15454 SDH nodes that reside behind a firewall.

Tools/Equipment

IIOP listener port number provided by your LAN or firewall administrator

Prerequisite Procedures

DLP-D60 Log into CTC, page 3-24

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Note If the Enable Proxy Server on port 1080 check box is checked, CTC will use port 1080 and ignore the configured IIOP port setting. If Enable Proxy Server is subsequently unchecked, the configured IIOP listener port will be used.

Step 1 In node view, click the Provisioning > Network > General tabs.

Step 2 In the TCC CORBA (IIOP) Listener Port area, choose a listener port option:

•Default - TCC Fixed—Uses Port 57790 to connect to ONS 15454 SDH nodes on the same side of the firewall or if no firewall is used (default). This option can be used for access through a firewall if Port 57790 is open.

•Standard Constant—Uses Port 683, the CORBA default port number.

•Other Constant—If Port 683 is not used, type the IIOP port specified by your firewall administrator. The port cannot use any of the ports shown in Table 4-2.

 

Cisco ONS 15454 SDH Procedure Guide, R4.6

4-20

January 2004

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Turn Up Node Before You BeginNTP-D24 Verify Card Installation Install Cards and Fiber-Optic CableStop. You have completed this procedure NTP-D30 Create Users and Assign Security DLP-D74 Create a New User-Single NodeDLP-D75 Create a New User-Multiple Nodes Click the Provisioning General tabs PurposeRequired/As Needed Confirmation dialog box, click Yes NTP-D279 Set Power Monitor Thresholds Node view, click the Provisioning General Power Monitor tabsNTP-D169 Set Up CTC Network Access DLP-D249 Provision IP Settings Click the Provisioning Network tabsCisco ONS 15454 SDH Procedure Guide, R4.6 Reboot Activity Active TCC2 LEDs Standby TCC2 LEDs Slot-0 Status=IpAddress Next Done Mod DLP-D65 Create a Static Route Cisco ONS 15454 SDH Reference ManualType- Choose Simple Password DLP-D250 Set Up or Change Open Shortest Path First ProtocolClick the No Authentication button January DLP-D251 Set Up or Change Routing Information Protocol NTP-D27 Set Up the ONS 15454 SDH for Firewall Access Iiop port Port Function NTP-D28 Set Up Timing DLP-D68 Provision the Iiop Listener Port on the CTC ComputerDLP-D69 Set Up External or Line Timing Stop . You have completed this procedureUnframed , FAS , FAS + CAS DLP-D70 Set Up Internal Timing NTP-D170 Create Protection Groups Type Cards Description and Installation Requirements DLP-D71 Create a 11 Protection Group DLP-D72 Create a 1N Protection Group Click the Provisioning Protection tabsDLP-D73 Create a 1+1 Protection Group DLP-D252 Create a Y-Cable Protection Group Creating a Y-Cable Protection GroupNTP-D34 Set Up Snmp Box FigureCreating an Snmp Trap Without Proxy January

Cisco ONS 15454 SDH specifications

Cisco Systems has long been a leader in networking and telecommunications, and one of its notable products is the Cisco ONS 15454 SDH (Synchronous Digital Hierarchy) system. Designed to support a wide range of networking applications, this platform is particularly suited for the transportation of voice, data, and video across metropolitan and wide area networks.

One of the main features of the Cisco ONS 15454 is its modular architecture, allowing for flexible configurations to meet varying demands. This flexibility enables service providers and enterprises to scale their networks as needed, easily adding or removing modules without significant downtime. The system can accommodate multiple technologies, including SONET, SDH, and wavelength-division multiplexing (WDM), making it an excellent solution for diverse environments.

Another critical characteristic of the ONS 15454 is its high-capacity transport capabilities. It can handle up to 400 Gbps in a single chassis, enabling operators to manage larger amounts of data traffic efficiently. This scaling is crucial for meeting the ever-increasing requirements for bandwidth in modern networks, especially with the rise of cloud services and video streaming.

Furthermore, the Cisco ONS 15454 supports various interface options, including Ethernet, TDM, and fiber channel, enabling operators to adapt the system to their existing infrastructures. This compatibility simplifies integration with legacy systems, allowing for a smoother transition to more advanced technologies.

Cisco has also placed a strong emphasis on network management and operational efficiency with the ONS 15454. Integrated management tools provide real-time monitoring and diagnostics, facilitating proactive maintenance and reducing operational costs. The system is designed for high reliability, featuring built-in redundancy and failover capabilities to ensure continuous service availability.

The ONS 15454's versatility extends to its support for various service types, ranging from basic voice services to complex data applications. It can effectively create service level agreements (SLAs) and prioritize traffic, enhancing the quality of service for critical applications.

In conclusion, the Cisco ONS 15454 SDH platform stands out for its modular design, high capacity, adaptability to different technologies, and robust management capabilities. It serves as a reliable backbone for network operators seeking to future-proof their infrastructures while addressing the dynamic demands of modern communication services. With Cisco's reputation for quality and innovation, the ONS 15454 remains a preferred choice for service providers looking to enhance their network capabilities.
Top Page Image Contents