Cisco Systems Cisco ONS 15454 SDH manual NTP-D24 Verify Card Installation

Page 2

Chapter 4 Turn Up Node

NTP-D24 Verify Card Installation

8.NTP-D170 Create Protection Groups, page 4-26—Complete this procedure, as needed, to set up 1:1, 1:N, 1+1, or Y-cable protection groups for ONS 15454 SDH electrical and optical cards. If you are turning up a DWDM or hybrid node, do not complete this procedure until directed to do so in Chapter 5, “Turn Up a DWDM Node.”

9.NTP-D34 Set Up SNMP, page 4-32—Complete this procedure if simple network management protocol (SNMP) will be used for network monitoring.

NTP-D24 Verify Card Installation

Purpose

This procedure verifies that the ONS 15454 SDH node is ready for turn up.

Tools/Equipment

An engineering work order, site plan, or other document specifying the

 

ONS 15454 SDH card installation.

Prerequisite Procedures

Chapter 1, “Install the Shelf and FMECs”

 

Chapter 2, “Install Cards and Fiber-Optic Cable”

Required/As Needed

Required

Onsite/Remote

Onsite

Security Level

Retrieve or higher

Step 1 Verify that two TCC2 cards are installed in Slots 7 and 11.

Step 2 Verify that the green ACT (active) LED is illuminated on one TCC2 and the amber STBY (standby) LED is illuminated on the second TCC2.

Note If the TCC2 cards are not installed, or if their LEDs are not operating as described, do not proceed. Repeat the “DLP-D332 Install the TCC2 Cards” task on page 2-7 , or refer to the Cisco ONS 15454 SDH Troubleshooting Guide to resolve installation problems before proceeding to Step 3.

If you are provisioning the ONS 15454 for DWDM only, continue with Step 16. Otherwise, continue with the next step.

Step 3 Verify that cross-connect cards (XC10G, XC-VXL-2.5G, or XC-VXL-10G) are installed in Slots 8 and 10. The cross-connect cards must be the same type.

Step 4 Verify that the green ACT (active) LED is illuminated on one cross-connect card and the amber STBY (standby) LED is illuminated on the second cross-connect card.

Note If the cross-connect cards are not installed, or if their LEDs are not illuminated as described, do not proceed. Repeat the “DLP-D333 Install the XC10G, XCVXL 10G, or XCVXL 2.5G Cards” task on page 2-9, or refer to the Cisco ONS 15454 SDH Troubleshooting Manual to resolve installation problems before proceeding to Step 5.

If you are provisioning the ONS 15454 for DWDM and TDM (hybrid node), continue with Step 16. Otherwise, continue with the next step.

Step 5 If your site plan requires an AIC-I card, verify that the AIC-I card is installed in Slot 9 and its ACT (active) LED displays a solid green light.

Cisco ONS 15454 SDH Procedure Guide, R4.6

4-2

January 2004

 

 

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Turn Up Node Before You BeginNTP-D24 Verify Card Installation Install Cards and Fiber-Optic CableStop. You have completed this procedure NTP-D30 Create Users and Assign Security DLP-D74 Create a New User-Single NodeDLP-D75 Create a New User-Multiple Nodes Click the Provisioning General tabs PurposeRequired/As Needed Confirmation dialog box, click Yes NTP-D279 Set Power Monitor Thresholds Node view, click the Provisioning General Power Monitor tabsNTP-D169 Set Up CTC Network Access DLP-D249 Provision IP Settings Click the Provisioning Network tabsCisco ONS 15454 SDH Procedure Guide, R4.6 Reboot Activity Active TCC2 LEDs Standby TCC2 LEDs Slot-0 Status=IpAddress Next Done Mod DLP-D65 Create a Static Route Cisco ONS 15454 SDH Reference ManualType- Choose Simple Password DLP-D250 Set Up or Change Open Shortest Path First ProtocolClick the No Authentication button January DLP-D251 Set Up or Change Routing Information Protocol NTP-D27 Set Up the ONS 15454 SDH for Firewall Access Iiop port Port Function NTP-D28 Set Up Timing DLP-D68 Provision the Iiop Listener Port on the CTC ComputerDLP-D69 Set Up External or Line Timing Stop . You have completed this procedureUnframed , FAS , FAS + CAS DLP-D70 Set Up Internal Timing NTP-D170 Create Protection Groups Type Cards Description and Installation Requirements DLP-D71 Create a 11 Protection Group DLP-D72 Create a 1N Protection Group Click the Provisioning Protection tabsDLP-D73 Create a 1+1 Protection Group DLP-D252 Create a Y-Cable Protection Group Creating a Y-Cable Protection GroupNTP-D34 Set Up Snmp Box FigureCreating an Snmp Trap Without Proxy January

Cisco ONS 15454 SDH specifications

Cisco Systems has long been a leader in networking and telecommunications, and one of its notable products is the Cisco ONS 15454 SDH (Synchronous Digital Hierarchy) system. Designed to support a wide range of networking applications, this platform is particularly suited for the transportation of voice, data, and video across metropolitan and wide area networks.

One of the main features of the Cisco ONS 15454 is its modular architecture, allowing for flexible configurations to meet varying demands. This flexibility enables service providers and enterprises to scale their networks as needed, easily adding or removing modules without significant downtime. The system can accommodate multiple technologies, including SONET, SDH, and wavelength-division multiplexing (WDM), making it an excellent solution for diverse environments.

Another critical characteristic of the ONS 15454 is its high-capacity transport capabilities. It can handle up to 400 Gbps in a single chassis, enabling operators to manage larger amounts of data traffic efficiently. This scaling is crucial for meeting the ever-increasing requirements for bandwidth in modern networks, especially with the rise of cloud services and video streaming.

Furthermore, the Cisco ONS 15454 supports various interface options, including Ethernet, TDM, and fiber channel, enabling operators to adapt the system to their existing infrastructures. This compatibility simplifies integration with legacy systems, allowing for a smoother transition to more advanced technologies.

Cisco has also placed a strong emphasis on network management and operational efficiency with the ONS 15454. Integrated management tools provide real-time monitoring and diagnostics, facilitating proactive maintenance and reducing operational costs. The system is designed for high reliability, featuring built-in redundancy and failover capabilities to ensure continuous service availability.

The ONS 15454's versatility extends to its support for various service types, ranging from basic voice services to complex data applications. It can effectively create service level agreements (SLAs) and prioritize traffic, enhancing the quality of service for critical applications.

In conclusion, the Cisco ONS 15454 SDH platform stands out for its modular design, high capacity, adaptability to different technologies, and robust management capabilities. It serves as a reliable backbone for network operators seeking to future-proof their infrastructures while addressing the dynamic demands of modern communication services. With Cisco's reputation for quality and innovation, the ONS 15454 remains a preferred choice for service providers looking to enhance their network capabilities.
Top Page Image Contents