Philips HC410 manual Audio Connections, Basic operation, Option 2 figure

Page 8

XP SBC HC 410/00 14-05-2001 14:23 Pagina 8

Audio Connections

Basic operation

English

7Adjust the volume to the desired level with the headphone volume control.

Option 2 (figure 5)

Connecting the FM transmitter to a headphone output of an audio source

IMPORTANT

Use only 1 of the audio inputs:

3.5 mm stereo headphone audio input OR the line audio input!

Using both audio inputs at the same time may damage your FM wireless system or your audio source!

1Connect the 2 RCA plugs of the stereo audio cable to the FM transmitter’s audio input 2:

Check if the red RCA plug (right channel) is connected to the right channel (red) of the FM transmitter’s audio input 2.

Check if the white RCA plug (left channel) is connected to the left channel (white) of the FM transmitter’s audio input 2.

2Connect the 3.5mm stereo plug of the stereo audio cable to the headphone output of an audio source, such as TV, HiFi or PC.

In case your audio source has a 6.3mm headphone output, use the supplied 3.5mm to 6.3 mm stereo adapter plug.

3Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal.

4Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter.

5To tune, turn the tuning knob until the signal is at its clearest and the tuning indicator will light up.

6Adjust the volume to the desired level with the headphone volume control.

Basic operation

When the FM transmitter is connected to a:

-line output of an audio source, such as REC OUT or LINE OUT or

-headphone output of an audio source.

1Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal.

2Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter.

3To tune, turn the tuning knob until the signal is at its clearest and the tuning indicator will light up.

4Adjust the volume to the desired level with the headphone volume control.

8

Image 8
Contents HC410 410/00 14-05-2001 1423 Pagina Index English Italiano Español20Introduction General information CongratulationsKit contents General information ControlsControls Installation Transmitter power supplyHeadphone power supply Headphone figureHeadphone battery replacement figure Audio ConnectionsAudio Connections Option 1 figureAudio Connections Basic operationOption 2 figure Basic operationTroubleshooting Problem RemedyNo sound Distorted soundTroubleshooting MaintenanceSpecifications RegulationsIntroduzione Informazioni generali CongratulazioniInformazioni generali Comandi Contenuto del kitComandiInstallazione Volume regolate il volume al livello di ascolto desideratoAlimentazione della trasmittente Alimentazione della cuffiaOpzione 1 figura Installazione Collegamenti audioCollegamenti audio Opzione 2 figura Funzionamento di baseProblema Rimedio Ricerca dei guastiAssenza di suono Suono distortoSicurezza dascolto ManutenzioneCaratteristiche RegolazioniIntroducción Información general ¡EnhorabuenaMandos Contenido del kitAuriculares múltiples con un transmisor Transmisor figuraMandos InstalaciónFuente de alimentación de los auriculares Conmutador de canales seleccioneInstalación Conexiones de audioCambio de las pilas de los auriculares figura Conexiones de audioConexiones de audio Opción 2 figuraFuncionamiento básico Cuando el transmisor de FM está conectado a unaResolución de problemas Problema SoluciónNo hay sonido Sonido distorsionado¡Cuidado de sus oídos MantenimientoEspecificaciones Reglamento Distorsión % THD Separación de canales 30 dBRF/FM LR03/AAA NiMH 12Volt/200mA AcdcSBC CS030/00 LR03/AAA NiMH, 550 mAhVolt/200 mA AC/DC Volt DCMA AC/DC AAA NiMH Philips NiCd20 cm HiFiMm 6,3 mm DC p HC412. O HC415 HC415 LR03/AAA NiMH Philips 433.5 MHz Meet Philips at the Internet