EMC DS-16B manual Fibre Channel IP Address, Fibre Channel IP address, Fibre Channel Subnetmask

Fibre Channel IP Address

Switch Management

The default subnet mask value is none. Refer to the network administrator for the appropriate subnet mask.

Enter the switch’s subnet address by using <Up> and <Down> to increment or decrement the displayed value. The numbers with the underline cursor is the group to modify.

Pressing <Enter> while Fibre Channel IP address is selected, displays:

Fibre Channel IP address:

0.0. 0. 0

!

Fibre Channel Subnetmask

The default Fibre Channel IP address is 0.0.0.0, as shown in the example. Enter a valid IP address.

To update the Fibre Channel’s IP address

1.Use <Up> and <Down> to increment or decrement the displayed value. The underlined cursor indicates the numbers to modify.

2.After entering a number, press <Tab/Esc> to move the cursor to modify the next field.

3.After setting the Fibre Channel’s IP address, pressing <Enter> stores the value.

CAUTION

The Fibre Channel IP address should NOT be set to the same address as the Ethernet IP address -- two different addresses are required.

Pressing <Enter> while Fibre Channel Subnetmask is selected, displays:

Fibre Channel Subnetmask none

The default subnetmask value is none, as shown in the example. Consult your network administrator for the appropriate subnetmask.

Enter the switch’s Fiber Channel Subnetmask by using <Up> and <Down> to increment or decrement the displayed value.

DS-16B Switch Menus