
General checks
1. | Ensure that all devices are plugged in and powered on. The switcher is |
| receiving power if one of the input LEDs is lit. |
2. | Ensure an active input is selected for output on the switcher. |
3. | Ensure that the proper signal format is supplied. |
4. | Check the cabling and make corrections as necessary. |
5. | Call the Extron S3 Sales & Technical Support Hotline if necessary. |
Plasma display S-video problem
Extron has encountered a problem with the
With the matrix switcher taken out of the system, the plasma works fine. It looks like a Extron problem, but it is not. The matrix switcher boosts the bad codec output, which makes the plasma go to the wrong setting.
Solution: Try placing an Extron video DC block adapter, part
Worksheets
Rather than trying to remember the configuration for each preset, use worksheets to record this information. Make copies of the blank worksheets on page
Worksheet example 1: Entering system equipment
Figure 3-19 shows a worksheet for a CrossPoint 128 HVA in a fictional organization with the system hardware annotated. Inputs 10 and 11 and output 7 have no connections in this organization, so they have been crossed out on the worksheet. On this example, preset 3 is used for the weekly status meeting. Choose your own method of notation.
Input sources
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
13
Output destinations
Preset # |
| Title: |
| Video: |
| Audio: |
|
|
|
|
|
Fill in the preset number and use colors, or dashes, etc. to make connecting lines.
Indicate if the configuration is for Video, Audio, or both.