Saving or Recalling a Preset
A "preset" is a configuration that has been stored.
1.Save a preset — Press and hold the Preset button until it flashes.
Save a | PRESET 2 seconds | PRESET |
preset | ||
| Press and hold. | The Preset button blinks. |
Recall a preset — Press and release the Preset button.
Recall a | PRESET |
|
|
| PRESET |
|
preset |
|
|
|
| ||
|
|
|
|
|
|
|
| Press and release. | The Preset button lights. | ||||
All input and output buttons with assigned presets light red.
When a preset is saved, the configuration data at assigned preset locations is overwritten.
INPUTS
1 
2 
3 
4 
5 
6
15 
16 
2.Press and release the desired input or output button.
The button blinks red to indicate that this preset is selected to save or recall.
1 | ENTER | The Enter button blinks | |
red to indicate the need to | |||
| |||
|
| activate the save or recall. |
3.Press and release the Enter button.
Setting the Front Panel Locks (Executive Modes)
The matrix switcher has three levels of front panel security lock that limit the operation of the switcher from the front panel. The three levels are:
Selecting Lock Mode 2 or Toggling Between
Mode 2 and Mode 0
NOTES:
• If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. The Preset, View, and Esc buttons flash twice.
• If the switcher is in Lock mode 2, this procedure selects mode 0 (unlocks the switcher). The View and Esc buttons flash twice.
Toggle the lock on or off by pressing and holding the Preset, View, and Esc buttons simultaneously until the buttons flash (approximately 2 seconds).
Lock mode 2 |
|
| Lock mode 0 |
| ||
C O N T R O L |
| C O N T R O L |
| C O N T R O L |
| C O N T R O L |
ENTER PRESET | VIEW | ESC | ENTER PRESET | VIEW | ESC | ENTER PRESET | VIEW | ESC | ENTER PRESET | VIEW | ESC |
Press and hold for | Press and hold for |
2 seconds. | 2 seconds. |
Selecting Lock Mode 2 or Toggling Between
Mode 2 and Mode 1
NOTES:
• If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. The Preset, View, and Esc buttons flash twice.
• If the switcher is in Lock mode 2, this procedure selects mode 1. 
The View and Esc buttons flash twice.
Toggle the lock on and off by pressing and holding the Video button and the Audio button simultaneously for approximately 2 seconds.
•• Lock mode 0 — The front panel is completely unlocked.
•• Lock mode 1 — All functions are locked from the front panel (except for setting Lock mode 2). Some functions can be viewed.
•• Lock mode 2 — Basic functions are unlocked. Advanced functions are locked and can be viewed only.
Basic functions consist of:
•• Making ties
•• Saving and recalling presets
•• Setting input audio gain and attenuation
•• Changing Lock modes Advanced functions consist of:
•• Setting audio output mutes
•• Setting audio output volume
•• Setting
Lock mode 1
C O N T R O L
ENTER PRESET VIEW ESC
Press and hold for 2 seconds.
Lock mode 2
C O N T R O L |
| C O N T R O L |
| C O N T R O L |
ENTER PRESET | VIEW | ESC | ENTER PRESET | VIEW | ESC | ENTER PRESET | VIEW | ESC |
Press and hold for 2 seconds.
18 XTP CrossPoint 1600 and 3200 • Front Panel Operations | XTP CrossPoint 1600 and 3200 • Front Panel Operations 19 |