32
Command | SIS Command | Response | Additional Description |
| (Host to Unit) | (Unit to Host) |
|
XTP CrossPoint 1600 and 3200 • Remote Control
Information requests |
|
Information request | I |
Request part number | N |
Request input/output board | *N |
configuration |
|
Example | *N |
(XTP CrossPoint 3200) |
|
VX1(XX2)•AX1(XX2)] In the response: VX1(XX2) is the video matrix size. AX1(XX2) is the audio matrix size.
X2!]See the Extron website, www.extron.com, for part numbers.
X2!.X2@1X2@2 ... X2@nX2#1X2#2 ... X2#n]
Part number, dot, 4 or 8 (n) X2@s; each is the input board installed, starting from input slot 1, followed by 4 or 8 (n) X2#s; each is the output board installed, starting from output slot 1.
Input slot 6 = XTP CP 4i VGA | Output slot 2 = XTP CP 4o (XTP) |
Input slot 3 = XTP CP 4i HDMI | Output slot 7 = No Board |
Input: 1 234 5 678
Output: 1 234 5 678
Query firmware version | Q | X2$] |
|
|
Example: | Q | 1.23] | The | |
|
|
| (sample value only). | |
|
|
|
|
|
|
|
|
|
|
NOTE: • = Space |
|
|
|
|
X1( = Number (quantity) of inputs |
| 4, 8, 12, 16, 20, 24, 28, 32 | ||
X2) = Number (quantity) of outputs |
| 4, 8, 12, 16, 20, 24, 28, 32 | ||
X2! = Part number |
|
|
| |
X2@ = Installed input board |
|
| F = XTP CP 4i VGA | H = XTP CP 4i HDMI |
|
|
| G = XTP CP 4i (TP) | I = XTP CP 4i DVI Pro |
X2# = Installed output board |
|
| X = No board installed |
|
|
| D = XTP CP 4o (TP) | J = XTP CP 4o DVI Pro |
E = XTP CP 4o HDMI M = XTP CP 4o SA (stereo audio) X = No board installed
X2$ = Firmware version number to second decimal place (x.xx)
SIS Command and Response Table for XTP T HDMI
XTP CrossPoint 1600 and 3200 • Remote Control 33
NOTE: These commands allow you to control and monitor the HDMI transmitter endpoint from the matrix switcher.
Command | SIS Command | Response | Additional Description |
| (Host to Unit to Endpoint) | (Endpoint to Unit to Host) |
|
|
|
|
|
Audio routing selection |
|
|
|
NOTE: These commands select between the audio embedded in the digital video stream and the
Input audio selection | EIX!*X1!AFMT} | AfmtIX!*X1!] |
|
Example: | EI1*0AFMT} | AfmtI1*0] | Auto (0): HDMI (digital) takes priority over analog. |
View input audio selection | EIX!AFMT} | X1!] |
|
View all input audio selections | EIAFMT} | X1!1X1!2X1!3 ... X1!n] | Each X1! is the enable or disable status of an input, |
|
|
| starting at input 1. n is 16 or 32. |
Audio input gain and attenuation
NOTE: The set gain (G) and set attenuation (g) commands are case sensitive.
Set input level to +dB value | X!*X1@G | InX!•AudX1#] |
|
Example: | 1*2G | In01•Aud+02] | Set input 1 audio gain to +2 dB. |
Set input level to | X!*X1$g | InX!•AudX1#] |
|
Increment gain | X!+G | InX!•AudX1#] | Increase gain by 1 dB. |
Example: | 5+G | In05•Aud+03] | Increase audio input 5 level from +2 dB to +3 dB. |
Decrement gain | InX!•AudX1#] | Decrease gain by 1 dB. | |
Read input level | X!G | X1#] |
|
NOTE: • = Space |
|
|
|
X! = Input number | 01 – 16 or 32 |
| |
X1! = Input audio source | 0 | = Auto (see the example above) | 2 = Analog (local |
X1@ = Audio gain | 1 | = HDMI |
|
0 to +24 (1 dB per step) |
| ||
X1# = Numeric dB value | |||
X1$ = Audio attenuation | 1 | – 18 (1 dB per step) |
|
|
|
|
|