Extron electronic 1600 setup guide Hdcp status, Video mutes, Input audio selection, EIX!*X1!AFMT

28 XTP CrossPoint 1600 and 3200 • Remote Control

Command	SIS Command	Response	Additional Description
	(Host to Unit)	(Unit to Host)

Analog input presets (available for inputs on an XTP CP 4i VGA universal analog input board only)

NOTE: Analog input presets are a set of variables that can be saved. For the complete list, see the XTP CrossPoint Switchers User Guide.

Save an analog input preset	X!*1*X&,		SprX!*1*X&]		Command character is a comma.
Recall an analog input preset	X!*1*X&.		RprX!*1*X&]		Command character is a period.
HDCP status
View input HDCP status	EIX!HDCP}		X*]
View HDCP status of all inputs	EI*HDCP}		X*1X*2X*3 ... X*n]
View output HDCP status	EOX@HDCP}		X(]
View HDCP status of all outputs	EO*HDCP}		X(1X(2X(3... X(n]
Video mutes
Video mute	X@*1B		VmtX@*1]		Mute output X@ (video off).
Video unmute	X@*0B		VmtX@*0]		Unmute output X@ (video on).
Read video mute	X@B		X1)]		1 = mute on, 0 = mute off.
Global video mute	1*B		Vmt1]		Mute all video outputs.
Global video unmute	0*B		Vmt0]		Unmute all video outputs.
NOTE: X! = Input number		01 – 16 or 32
X@ = Output number		01 – 16 or 32
X& = Analog input preset		1 through 8
X* = HDCP status (for inputs)		0 = no source connected		1 = source is HDCP compliant		2 = source is not HDCP compliant
X( = HDCP status (for outputs)		0, 2, 4, or 6 = no monitor connected			1, 3, or 5 = monitor connected but not encrypted
X1) = Mute		7 = monitor connected and encrypted
		0 = off (unmuted)	1 = on (muted)

XTP CrossPoint 1600 and 3200 • Remote Control 29

Command	SIS Command	Response	Additional Description
	(Host to Unit)	(Unit to Host)
Input audio selection
Input audio selection	EIX!*X1!AFMT}	AfmtIX!*X1!]
Example:	EI1*0AFMT}	AfmtI1*0]	Auto (0): Digital audio takes priority over analog audio.
View input audio selection	EIX!AFMT}	X1!]
View input audio all selections	EIAFMT}	X1!1X1!2X1!3... X1!n]	Each X1! is the enable or disable status of an output,
			starting at output 1. n is 16 or 32.
Audio input gain and attenuation

NOTE: The set gain (G) and set attenuation (g) commands are case sensitive.

Set input level to +dB value	X!*X1@G	InX!•AudX1#]
Example:	1*2G	]	Set input 1 audio gain to +2 dB.
		In01•Aud+02
Set input level to -dB value	X!*X1$g	InX!•AudX1#]
Increment gain	X!+G	InX!•AudX1#]	Increase gain by 1 dB.
Example:	5+G	]	Increase audio input 5 level from +2 dB to +3 dB.
		In05•Aud+03
Decrement gain	X!–G	InX!•AudX1#]	Decrease gain by 1 dB.
Read input level	X!G	X1#]

NOTE: • = Space
X! = Input number	01 – 16 or 32
X1! = Input audio source	0	= Auto (see the example above)	2 = Analog (local 2-channel audio)
X1@ = Audio gain	1	= HDMI (de-embedded digital audio) (default)
	0 to +24 (1 dB per step)
X1# = Numeric dB value	–18to +24 (45 steps of gain or attenuation) (Default = 0 dB)
X1$ = Audio attenuation	1	– 18 (1 dB per step)