Q-Logic 8200 SERIES manual Index

Index

A

accessing SANbox SSP for the first time 3-7accessing the CLI through the serial console

port 3-7

configuring terminal settings on the host computer 3-7

modifying Ethernet settings for remote access 3-8

powering up 3-7audience 1-2

B

BACK-END STORAGE NOT FOUND (FABRIC/LOOP) problem statement 7-2

BACK-END STORAGE NOT FOUND BY SVM problem statement 7-2

boot sets 6-2

installing new release on boot set of the SANbox SSP 6-4

selecting the active boot set from the local console 6-2

C

CANNOT ACCESS SANbox SSP CONSOLE

PORT problem statement 7-3CANNOT LOG INTO SANbox SSP (GUI OR

CLI) problem statement 7-3Clear command B-8

command line interface 2-1accessing B-4overview B-1

SANbox SSP built-in users and groups B-6shutting down the SANbox SSP 5-11using locally 4-5

using remotely 4-5

commands

by object type B-1list B-8

syntax B-2connecting to the SAN

connecting hosts 3-11SANbox SSPs 3-10StoreAge SVM appliances 3-9

console port connection 2-9,3-6contact information 1-7Create User command B-8

D

defaults

device frame size 5-7

Telnet login and password B-5Delete User command B-8

device management specifications A-3devices

connecting directly to SANbox SSP 5-5diagnostics

Power-On Self Test (POST) 6-6

SANbox SSP Management GUI Diagnostics screen 4-11

SANbox SSP Management GUI System Sensors panel 4-10

Disable Eth command B-9Disable Port command B-9Disable snmpv3 command B-10Disable User command B-10documentation 1-2

E

electrical specifications A-3Enable Eth command B-10Enable Port command B-11Enable snmpv3 command B-11

SN0054628-00 A Index-1