B – Command Reference Commands
Q
speed [port speed] NEGOTIATE, 1G, 2G
Notes You must restart the system for port capability, port speed, or frame size changes to take effect.
See Also "Disable Port Command" on page
Modify Timezone Command
Starts a Time Zone Configuration utility that enables you to select your geographical area and time zone, and then modify your local time if needed.
Syntax modify timezone
Notes Once the time zone is set, the system automatically switches between Standard Time and Daylight Saving Time.
See Also "Show Timezone Command" on page
Modify User Command
Adds the specified user to the specified group. This command also changes the password defined for the specified user.
The groups defined for SANbox SSP are Administrator and Monitor. When new users are added, they get the same permissions as the existing kadmin and kmonitor users.
Syntax modify user [user name] group [group name] password
Keywords modify user [user name]
User name that you want to add to the specified group.
group [group name]
Name of the group to which you are adding the specified user: Administrator or Monitor.
password
Include this keyword if you want to change the password.