B – Command Reference Commands
Q
B.3
Commands
Clear Command
Clears the screen of text.
Syntax clear
Create User Command
Creates a new user in the specified group, or views user settings. The groups defined for SANbox SSP are Administrator and Monitor. When new users are added, they get the same permissions as the existing kadmin and kmonitor users. When you issue this command, you must enter an SNMP password greater than eight characters in length, in addition to your normal account password.
Syntax create user [user name] group [group name]
Keywords create user [user name]
Name of the new user
group [group name]
Name of the group to which the user will belong: Administrator or kmonitor.
Notes Only users belonging to the Administrator group can add, delete, and disable/enable users, and the current user cannot be disabled or deleted.
See Also "Delete User Command" on page
Delete User Command
Removes the specified user from the list of administrators who can manage the SANbox SSP.
Syntax delete user [user name]
Keywords delete user [user name]
Name of the user that you are removing from the system.
Notes Only users belonging to the Administrator group can add, delete, and disable/enable users, and the current user cannot be disabled or deleted.