Pelco FR82011 manual Installation, Package Contents

Page 12

Installation

PACKAGE CONTENTS

The following items are supplied:

1FT82011 or FR82011 module

1Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European configurations); 100-240 VAC, 50-60 Hz input, 12 VDC output

1Wall clip with two 4-40 x 0.250-inch Phillips pan head screws with lock washers (for attachment of single module to wall)

1FT82011/FR82011 Fiber Transmitter and Receiver Installation manual (this manual)

SETTING 10BASE-T/100BASE-TX PORT MODES OF OPERATION

NOTE: As a matter of convenience, it is recommended that you verify the modes of operation for the 10BASE-T/100-BASE-TX port and then change the mode settings—if necessary—before mounting the FT82011/FR82011 module into a rack or onto a wall.

The FT82011/FR82011 module provides various configuration options that allow you to select the desired modes of operation for the 10BASE-T/100BASE-TX port. You can select the desired modes of operation by means of a TX Mode switch that is provided on the bottom of the module (refer to Figure 4).

TX Mode

0.Auto Neg / Dis FC

1.100 FD / Dis FC

2.100 HD / Dis FC

3.10 FD / Dis FC

4.10 HD / Dis FC

5.Auto Neg / En FC

6.100 FD / En FC

7.100 HD / En FC

8.10 FD / En FC

9.10 HD / En FC

TX MODE SWITCH

Figure 4. TX Mode Switch for 10BASE-T/100BASE-TX Port

12

C2653M (6/07)

Page 11 Page 13
Image 12
Page 11 Page 13
Contents FT82011/FR82011 Ethernet Media Converter Page Contents List of IllustrationsList of Tables Important Safety Instructions Risk of Electric Shock Do not Open Regulatory Notices Radio and Television InterferenceProduct Overview DescriptionC2653M 6/07 Models Multimode ModelsSingle-Mode Models*† RK5000PS-5U rack mount chassisFront Panel 10BASE-T/100BASE-TX Ports 1-4, RJ-45 connectors Rear PanelInstallation Package ContentsFlow control default setting 10BASE-T/100BASE-TX Modes of OperationMounting Mounting the FT82011/FR82011 Module Into a RackMounting the FT82011/FR82011 Module Using the Wall Clip Connections Fiber connection Troubleshooting Optic Fault LED Color MeaningAny of the following fault conditions If the cable is Receive optical signalCheck for problems Budget specification statedMeaning Possible Cause Corrective Action Optic Fault LED Laser has reached end of lifeTable C. Troubleshooting with Rear-Panel Indicators Lished Is not desired, refer to the SettingAmber Amber Is occurringMeaning Possible Cause Not litDesired, no action is required. If Full-duplexMode Occur on a half-duplex link Required Half-duplexMode Not desired, refer to the Setting Color Meaning Possible Cause Corrective ActionDesired, no action is required Or if it is not the proper cableNot lit Specifications Quality of ServiceWeighted fair queuing scheduling Model Number Wavelength Optical Maximum Transmit/Receive ReceiverEnd Multimode 62.5/125 μmAppendix. RJ-45 Connector Pinouts Not usedC2653M 6/07 Product Warranty and Return Information ISO9001
Top Page Image Contents