Pelco FR82011 manual Fiber connection

Page 17

•Fiber connection

NOTE: Fiber port A of the FT82011 module connects to fiber port B of the FR82011 module or of any other Pelco Ethernet switch that supports wavelength division multiplexing (WDM). Similarly, fiber port B of the FR82011 module connects to fiber port A of the FT82011 module or of any other Pelco Ethernet switch that supports WDM. Note that port A and port B provide wavelength compatibility:

–Multimode fiber port A transmits data at 1310 nm and receives data at 850 nm. Multimode fiber port B transmits data at 850 nm and receives data at 1310 nm.

–Single-mode fiber port A transmits data at 1310 nm and receives data at 1550 nm. Single-mode fiber port B transmits data at 1550 nm and receives data at 1310 nm.

C2653M (6/07)

17

Image 17

Contents FT82011/FR82011 Ethernet Media Converter Page List of Tables ContentsList of Illustrations Important Safety Instructions Risk of Electric Shock Do not Open Radio and Television Interference Regulatory NoticesDescription Product OverviewC2653M 6/07 Multimode Models ModelsSingle-Mode Models*† RK5000PS-5U rack mount chassisFront Panel Rear Panel 10BASE-T/100BASE-TX Ports 1-4, RJ-45 connectorsPackage Contents Installation10BASE-T/100BASE-TX Modes of Operation Flow control default settingMounting the FT82011/FR82011 Module Into a Rack MountingMounting the FT82011/FR82011 Module Using the Wall Clip Connections Fiber connection Troubleshooting Color Meaning Optic Fault LEDReceive optical signal Any of the following fault conditions If the cable isCheck for problems Budget specification statedLaser has reached end of life Meaning Possible Cause Corrective Action Optic Fault LEDLished Is not desired, refer to the Setting Table C. Troubleshooting with Rear-Panel IndicatorsAmber Amber Is occurringNot lit Meaning Possible CauseFull-duplex Desired, no action is required. IfMode Occur on a half-duplex link Required Half-duplexColor Meaning Possible Cause Corrective Action Mode Not desired, refer to the SettingDesired, no action is required Or if it is not the proper cableNot lit Weighted fair queuing scheduling SpecificationsQuality of Service Receiver Model Number Wavelength Optical Maximum Transmit/ReceiveEnd Multimode 62.5/125 μmNot used Appendix. RJ-45 Connector PinoutsC2653M 6/07 Product Warranty and Return Information ISO9001