Pelco FR82011 manual Table C. Troubleshooting with Rear-Panel Indicators, Amber Is occurring

Page 22

Table C. Troubleshooting with Rear-Panel Indicators

Indicator
Color	Meaning	Possible Cause	Corrective Action

	RJ-45 10BASE-T/100BASE-TX Port Status LED - Left (Link/Activity)

Amber	A 10BASE-T	—	If 10BASE-T operation is desired, no
	link is estab-		action is required. If 10BASE-T operation
	lished.		is not desired, refer to the Setting
			10BASE-T/100BASE-TX Port Modes of
			Operation section in this manual for
			information.

Flashing	Data activity	—	If 10BASE-T operation is desired, no
amber	is occurring		action is required. If 10BASE-T operation
	on the		is not desired, refer to the Setting
	10BASE-T		10BASE-T/100BASE-TX Port Modes of
	link—data is		Operation section in this manual for
	being trans-		information.
	mitted or
	received.

Green	A 100BASE-	—	If 100BASE-TX operation is desired, no
	TX link is		action is required. If 100BASE-TX
	established.		operation is not desired, refer to the
			Setting 10BASE-T/100BASE-TX Port
			Modes of Operation section in this
			manual for information.

Flashing	Data activity	—	If 100BASE-TX operation is desired, no
green	is occurring		action is required. If 100BASE-TX
	on the		operation is not desired, refer to the
	100BASE-TX		Setting 10BASE-T/100BASE-TX Port
	link—data is		Modes of Operation section in this
	being trans-		manual for information.
	mitted or
	received.

			(Continued on next page)

22	C2653M (6/07)

Image 22

Contents FT82011/FR82011 Ethernet Media Converter Page List of Illustrations ContentsList of Tables Important Safety Instructions Risk of Electric Shock Do not Open Regulatory Notices Radio and Television InterferenceProduct Overview DescriptionC2653M 6/07 Single-Mode Models*† ModelsMultimode Models RK5000PS-5U rack mount chassisFront Panel 10BASE-T/100BASE-TX Ports 1-4, RJ-45 connectors Rear PanelInstallation Package ContentsFlow control default setting 10BASE-T/100BASE-TX Modes of OperationMounting Mounting the FT82011/FR82011 Module Into a RackMounting the FT82011/FR82011 Module Using the Wall Clip Connections Fiber connection Troubleshooting Optic Fault LED Color MeaningCheck for problems Any of the following fault conditions If the cable isReceive optical signal Budget specification statedMeaning Possible Cause Corrective Action Optic Fault LED Laser has reached end of lifeAmber Table C. Troubleshooting with Rear-Panel IndicatorsLished Is not desired, refer to the Setting Amber Is occurringMeaning Possible Cause Not litMode Desired, no action is required. IfFull-duplex Occur on a half-duplex link Required Half-duplexDesired, no action is required Mode Not desired, refer to the SettingColor Meaning Possible Cause Corrective Action Or if it is not the proper cableNot lit Quality of Service SpecificationsWeighted fair queuing scheduling End Model Number Wavelength Optical Maximum Transmit/ReceiveReceiver Multimode 62.5/125 μmAppendix. RJ-45 Connector Pinouts Not usedC2653M 6/07 Product Warranty and Return Information ISO9001