Sun Microsystems CP3000 manual FRU Information, 2Standard FRU Data Records

Page 44

3.3FRU Information

Board information such as serial number, date of manufacture, OEM name, part number, and so on is retrievable from the FRU EEPROM integrated into the MMC. FRU information stored onboard the AMC.1-HDD SAS disk complies with the PICMG 2.9 specification.

The AMC.1-HDD SAS disk includes the standard FRU data records per the IPMI Platform Management FRU Information Storage Definition, Board Info Area. The AMC.1-HDD SAS disk includes additional FRU records as defined in the PICMG 2.9 specification.

TABLE 3-2Standard FRU Data Records

Product Information

AMC.1-HDD SAS Disk

 

 

Version

1

Language Code

0 (EN-English)

MFG date.time

See note 1

Manufacturer Name

Sun Microsystems, Inc.

Product Name

SAS AMC.1 xxxGB disk, where xxx denotes

 

disk capacity

Product Serial Number

2009NAT-YYWWNTSSSS (See note 2)

Product Part / Model#

375-mmmm-01 or 376-mmmm-01, where

 

mmmm denotes product model based on disk

 

capacity

Product Version

50

 

 

1 Manufacturing time is defined as 'minutes since January 1, 1996 in the IPMI FRU specification.

2 Serial Number format:

2009NAT = vendor and factory code

YY= year (4 = 2004, 0 = 2010) NT = multiuse code

WW = work week

SSSS = sequence number (0-9999)

3-4Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010

Image 44
Contents For the AMC.1-HDD SAS Disk Please Recycle Contents Overview Managing the AMCConfiguring the AMC Connectors and PortsEnvironment Specifications Agency CertificationsIndex Index-1 Preface Typographic ConventionsRelated Documentation Third-Party Web SitesSun Welcomes Your Comments Page Important Safety Information for Sun Hardware Systems Getting StartedSystem Requirements Operating Systems CompatibilityChassis Compatibility Blade Server CompatibilityUnpacking Electrical and EnvironmentalHandling AMCs AMC Faceplate 1AMC.1-HDD SAS Disk FaceplateAMC LEDs 1AMC Status LEDs2Hot-Swap Blue LED States Shut down the payload OS Removing and Installing AMCsRemoving an AMC Hot-Swap LED starts blinking 2Deactivating the AMC Remove the AMC 3Removing the AMCRemoving a Blade Server and AMC 4Front Cable Management Bracket in Lower PositionInstalling an AMC Remove the filler panel, if necessaryObtain the AMC card from the ship kit 5Sample Top View6Opening the Injector/Ejector Latch Page Push the ejector latch in fully 7Inserting the AMC Into a Blade ServerTo Enable AMC Port 2 Driven by Port 1 of SAS Controller To Enable AMC Port 3 Driven by Port 2 of SAS ControllerPower on the system, if necessary Enabling and Disabling SAS PortsTo Disable AMC Port 2 Driven by Port 1 of SAS Controller To Disable AMC Port 3 Driven by Port 2 of SAS ControllerPage Overview Features Hard Drive Disk Power RegulatorKey Components Module Management Controller MMC SAS ControllerFlash LEDs Port ConnectorsFaceplate and LEDs OOS Functional Diagram Technical Support and WarrantyPage 4Sun Netra CP3000 AMC.1-HDD SAS disk Barcode Labeling Disposal Managing the AMC Ipmi Controller Supported Ipmi CommandsMonitoring and Control Functions 1Supported Ipmi Commands FRU Information 2Standard FRU Data RecordsSensors 3Threshold SensorsFirmware and Software Upgrades Readme files within the download packageConfiguring the AMC Configuration Tools Boot Bios UtilityPress Ctrl C Features and ConfigurationsLaunching the Boot Bios Utility Page OpenBoot Bios 2Adapter Properties MenuExtensible Firmware Interface EFI Enabling and Disabling Channel PortsConnectors and Ports Table A-1Pin Assignments Connector Locations and AssignmentsConnector Pinouts Appendix a Connectors and Ports SAS Controller Ports Keying Ports 1AMC e-Keying Port AssignmentsPage Environment Specifications Table B-1Electrical Specifications Table B-2Environmental SpecificationsElectrical and Environmental ElectricalTable B-3MTBF Values by Temperature RPMNormal Operating Ranges ReliabilityAbsolute Maximum Ratings Mechanical Board Dimensions and WeightAMC.1-HDD SAS disk PCB Dimensions Page Agency Certifications CE Certification NEBS/ETSISafety 2 EN 55024 Immunity Emissions Test Regulations1 EN 55022 Emissions Industry Canada Canada Regulatory InformationFCC USA Page Index NumericsNEBS/ETSI, C-2