Paradyne 8784 manual IN-3

Index

Link

Trap Interfaces, A-18 Traps, A-18

Up LEDs, 4-14link-layer protocols, 8-1 linkUp and linkDown traps, B-2local

Line Loopback (LLB), 5-3 management features, 1-2

LOF (Loss Of Frame) status message, 4-3login

DSLAM, 2-2

Telnet requirement, A-11 Login ID, 7-1

access levels, 7-1 adding, 7-2

ASCII, printable characters, 7-3 deleting, 7-3

Loopback DTE, 5-5 Line, 5-3

Remote Send Line, 5-6

Remote Telco Line , enabling/disabling, A-9 Repeater, 5-4

Telco-initiated,A-9

LOS (Loss Of Signal), status message, 4-3

LTU

DSL Mode, A-9

Mismatch, status message, 4-4

M

main menu, 2-3Management

and Communication Options, A-10 basic MIBs, 1-4 enabling/disabling SNMP, A-13 General SNMP Options, A-12 port settings, 2-1

SNMP, 1-4 Margin Threshold, A-2

MCC

defined, 1-2

IP addressing scheme, 8-1 logging in, 2-2

Memory Fail, self-test result, 4-5messages

alarm and device, 6-1,6-3 health and status, 4-3 line 24, 6-3

self-test results, 4-5 test status, 4-5

MIB support, 1-4

Monitor and Send 511 pattern, 5-7 monitoring the unit, 4-1

N

navigating the screens, 2-6Net

Com Link Down, status message, 4-4 Margin Threshold, status message, 4-4

Network

current performance statistics, 4-10 DSL Failed, self-test result, 4-5 enabling/disabling AutoRate, 3-10 Error Statistics, 4-6

Interface Options, A-2 performance statistics, 4-8 sample configurations, 1-3 Send AIS on Failure, A-6 tests, 5-2

NMS

Destination, A-17

IP Address, A-15

IP Validation, A-15

SNMP connectivity, 8-1 Security Options, A-14

No Test Active, status message, 4-5

NTU

DSL Mode, A-9

Mismatch, status message, 4-4Number of

NMS Managers, A-15

Trap Managers, A-17

O

OK LED, 4-14

OOF (Out Of Frame), status message, 4-4Operator

ATI access level, 7-1 Telnet Access Level, A-11

options

configuration tables, A-1overview

features, 1-1 user’s guide, v

8784-A2-GB20-30 February 2001 IN-3