Paradyne 8784 manual Selecting an IP Addressing Scheme, All Configurations

IP Addressing

8

Selecting an IP Addressing Scheme

Your IP addressing scheme depends in part whether the MCC controlling the chassis is running IP Conservative software.

Configurations Not Running IP Conservative Software

In a configuration not running IP Conservative software, the NTU’s network interface IP address is assigned through the peer IP address of the LTU’s Network Interface menu.

he termination unit is assigned an IP address and subnet through the DSLAM Configuration→ DSL Cards→ Set IP Address menu. Once the address is Tassigned, you can use the ATI to assign:

Peer IP addresses to the two TDM SDSL ports. These addresses are used as the IP addresses of the remote units. See Table A-1, Network Interface

TOptions, in Appendix A, Configuration Options.

An IP address for each NMS to act as a trap manager. See Table A-8, SNMP Trap Options, in Appendix A, Configuration Options.

All Configurations

he NTU obtains its IP address when the PPP link is established over the EOC.

Use the ATI to assign:

An IP address for each NMS. See Table A-7, SNMP NMS Security Options, in

TAppendix A, Configuration Options.

An IP address for the TFTP server you wish to use to upload and download configurations. See Configuration Loader in Chapter 3, Initial Startup and Configuration, and the documentation for your TFTP server.

8784-A2-GB20-30 February 2001 8-1