Paradyne 8784 manual IN-4

Index

P				Session Access Level, Telnet, A-11
Passed, self-test result, 4-5				size of card, D-1
				SNMP
pattern test,	5-7
				Community Name Access, A-13
Peer IP Address, A-3
				General Management Options, A-12
performance statistics
				Management
Current Network Performance, 4-10
				enabling/disabling,			A-13
DSX-1 Performance Statistics, 4-11
				general,	1-4
Error Statistics, 4-6
				limiting access, 7-4
Network Performance Statistics,			4-8
				NMS
physical environment requirements,			D-1
				Security,	7-4
pin assignments, C-1
				Security Options, A-14–A-15
Port Status,	A-5
				standards compliance for traps, B-1
power requirements, D-1
				system entries,		3-2
Primary Clock Source, A-6
				Traps, B-1
R				configuring,		6-2
				enabling/disabling,			A-17
Rate				Options,	A-16
Auto, A-3				support,	1-4
DSL Line, A-3				specifications, D-1
excessive errors threshold, A-5				standards compliance for SNMP traps, B-1
related documents, vi				starting an ATI session, 2-2
Remote				start-up,2-1
management features, 1-2				status
Send Line Loopback, 5-6				Port, DSX-1,A-5
Telco Line Loopback, enabling/disabling, A-9				test messages,		4-5
Repeater Loopback (RLB), 5-4				Status menu
Resetting, 3-11				Display LEDs, 4-13
resetting				Performance Statistics
the AutoRate feature, 3-11				Current Network, 4-10
the unit from the Control menu,			3-12	DSX-1,4-11
restoring access to the ATI,		3-4,3-11		Network,	4-8
				Network Error, 4-6
S				System and Test
safety certifications, D-1				Self-Test Results,			4-5
				Status, 4-2
saving configuration options,		3-7
				Test Status, 4-5
screen area,	2-5
				System
security, 7-1
				device name field, 3-2
options,	A-14
				Identity information, 3-2
self-test results, 4-5
				LEDs, 4-14
Send
				Options, A-8
AIS on Network Failure,		A-6
				System Options
All Ones on DSX-1 Failure, A-6
				Test Timeout,	A-9
and Monitor 511, 5-7

Remote Line Loopback, 5-6

IN-4 February 2001 8784-A2-GB20-30