Paradyne 8784 manual About This Guide, Document Purpose and Intended Audience, Document Summary

About This Guide

Document Purpose and Intended Audience

This guide contains information needed to set up, configure, and operate the

2-port Hotwire 8784 Time Division Multiplexer Symmetric Digital Subscriber Line (TDM SDSL) Termination Unit, and is intended for installers and operators.

Document Summary

Section	Description
Chapter 1, About the Hotwire	Describes the Hotwire 8784 Termination Unit’s
8784 Termination Unit	features and capabilities.
Chapter 2, Using the	Provides instructions for accessing the user interface
Asynchronous Terminal Interface	and navigating the screens.
Chapter 3, Initial Startup and	Provides procedures for configuring the unit.
Configuration
Chapter 4, Monitoring the Unit	Describes using the LEDs, status, and network
	statistics to monitor the unit.
Chapter 5, Testing	Provides information about available tests and test
	setup.
Chapter 6, Messages and	Provides information on SNMP traps, device
Troubleshooting	messages, and troubleshooting.
Chapter 7, Security	Presents procedures for creating a login, setting the
	effective access levels, and controlling SNMP
	access.
Chapter 8, IP Addressing	Provides information and examples regarding IP
	addresses.
Appendix A, Configuration	Contains all configuration options, default settings,
Options	and possible settings.
Appendix B, Standards	Contains SNMP trap compliance information.
Compliance for SNMP Traps
Appendix C, Connector Pin	Lists the pin assignments for the front panel DTE
Assignments	connector.

8784-A2-GB20-30 February 2001 v