Paradyne 8784 manual Running Network Tests, Main Menu→ Test→ Network & DSX-1 Tests

5. Testing

Running Network Tests

Network tests require the participation of your network service provider.

To access the Network & DSX-1 Tests screen, follow this menu selection sequence:

Main Menu→ Test→ Network & DSX-1 Tests

main/test/network_DSX1		Hotwire
Slot: 4		Model: 8784
Port: 2
	NETWORK & DSX-1 TESTS
Test	Command Status	Results

--------------------------------------------------------------------------------

Local Loopbacks
Line	Loopback:	Start	Inactive	00:00:00
DSX-1 Repeater Loopback:		Start	Inactive	00:00:00
DSX-1 DTE Loopback:		Start	Inactive	00:00:00
Remote	Loopbacks
Send	Line Loopback: Down	Send	Inactive	00:00:00
Pattern Tests
Send	and Monitor 511	Stop	Active	hh:mm:ss - Errors 99999+

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu	MainMenu	Exit
ResetMon

Use the Command column to start or stop a test. When the Status column shows that a test is Inactive, Start is displayed; when a test is Active, Stop is displayed. Position the cursor at the desired Start or Stop command and press Enter. The Results column displays the test duration.

When the Send and Monitor 511 test is active, ResetMon is available to reset the error counter to zero.

Selecting Abort All Tests from the Test menu will not disrupt a Send and

Monitor 511 test.

5-2 February 2001 8784-A2-GB20-30