Patton electronic 2292, 2294 manual Status LEDs, Led

Model 2292 & 2294 Series Getting Started Guide 5 • LEDs status and monitoring

Status LEDs

This chapter describes SmartNode VoIP extender front panel LEDs. Figure 16 shows SmartNode 2292 and 2294 Series LEDs. LED definitions are listed in table 8 on page 37.

i n

k

L

L

I P

V

o

r

n

o w

e

R

u

P

									v	i t	y
					M		c	t i
			0	0		A
	k	1
i n
		Enet			0

v

i t

y

0

/ 0

M

c

t i

A

0

0

k

1

L

in

1

Enet

	2294
SmartNode		IP
	Over
	-Line
Leased	Console

				2	0	/ 3
	/ 1	0	/
0
	Ports

							SmartNode 2294
							Leased-Line Extender Over IP
	PowerRun	VoIP	Link	100M Activity	Link 100M Activity
			Link			0/0 0/1 0/2 0/3
								Console
								Voice
Power	VoIP Link		Enet 0		Enet 1	Voice	Voice	Port 0/3	Console
Run			100M		100M	Port 0/0	Port 0/2		port
							Voice
		Enet 0		Enet 0	Enet 1	Enet 1	Port 0/1
		Link		Activity	Link	Activity

Figure 16. Examples of SmartNode 2292 and 2294 Series front panels

		Table 8. SmartNode LED Indications
LED		Description
	Note	If an error occurs, all LEDs will flash once per second.
Power		When lit, indicates power is applied. Off indicates no power applied.
Run		When lit, indicates normal operation. Flashes once per second during boot (startup).
VoIP Link		When lit, indicates the gateway is registered on a gatekeeper, media gateway con-
		troller, associated to a remote unit, or has an active VoIP connection. Off indicates the
		unit is not configured or registered and has no active VoIP connection. Flashing green
		indicates that the unit is attempting or has failed to associate/register
Voice port		Solid when leased line channel is operational. Should not be off or blinking.
Ethernet (each port)		• Link: Lit when Ethernet link is up.
		• 100M: On when 100-Mbps Ethernet is selected.
		• Activity: Flashes when data is received or transmitted from the unit to the LAN.

Status LEDs 37