Patton electronic 2160 Utility Command Menu, Upgrade main software, Backup system configuration

Page 100

Model 2160 Series User Manual

5 • Console and Telnet configuration

 

 

Utility Command Menu

Model 2160 has three utility tools embedded in the firmware: upgrade, backup and restore. You can update the new firmware via TFTP upgrade tools, backup the configuration via the TFTP backup tool and restore the configuration via the TFTP restore tool. To upgrade the firmware, you must have the new firmware file named *.bin that will be supported by supplier. Also, you must have your own TFTP server. For backup and restore operations, you must also have your own TFTP server to backup and restore the configuration files.

Move the cursor “ >>” to utility in the main menu and press Enter. The following menu displays:

>> upgrade

Upgrade main software

backup

Backup system configuration

restore

Restore system configuration

Upgrade main software

To upgrade the Model 2160 firmware, move the cursor “ >>” to upgrade in the utility menu and press Enter. Type the TFTP server IP address and name of the upgraded firmware file.

-----------------------------------------------------------------------------

Command: utility upgrade <ip> <file>

Message: Please input the following information.

TFTP server IP address (ENTER for default) <192.168.0.2>: Upgrade filename (ENTER for default) <default.bin>:

-----------------------------------------------------------------------------

Backup system configuration

To backup the current system configuration, move the cursor “ >>” to backup in the utility menu and press Enter. Type the TFTP server IP address and name for the backup file.

-----------------------------------------------------------------------------

Command: utility backup <ip> <file>

Message: Please input the following information.

TFTP server IP address (ENTER for default) <192.168.0.2>: Upgrade filename (ENTER for default) <default.bin>:

-----------------------------------------------------------------------------

Restore system configuration

To restore a saved configuration file, move the cursor “ >>” to restore in the utility menu and press Enter. Type the TFTP server IP address and name of the system configuration file you want to restore to the Model 2160.

-----------------------------------------------------------------------------

Command: utility restore <ip> <file>

Message: Please input the following information.

TFTP server IP address (ENTER for default) <192.168.0.2>:

Upgrade filename (ENTER for default) <default.bin>:

Utility Command Menu

100

Page 99 Page 101
Image 100
Page 99 Page 101
Contents CopperLink Model 2160 Series Mailsupport@patton.com Summary Table of Contents Table of Contents Web configuration Console and Telnet configuration LAN Vlan Port pin-outs 111 List of Figures Page List of Tables Audience About this guideStructure Precautions Impaired functioningSafety when working with electricity Tected by a circuit breakerPreventing Electrostatic Discharge Damage General observationsTypographical conventions used in this document General conventionsChapter contents General informationModel 2160 overview ModelModel 2160 front panel LED descriptionsModel 2160 rear panel Port descriptionsReset button Ground terminalApplications overview Introduction Typical applicationDistance charts Distance Chart 2160 Series Auto Mode TCPAM-32/16Distance Chart 2160 Series Optimal Mode TCPAM-128 Distance Chart Model 2160 Series Optimal ModeDistance Chart 2160 Series TCPAM-128 Distance Chart Model 2160 Series TCPAM-128Hardware installation Planning the installation AC Power Mains Network diagramIP related information Installing the Model Connecting cablesLocation and mounting requirements Unpacking the ModelGrounding the Model 2160 and connecting power Grounding studConfiguring the Model Web configuration requirementsConsole configuration requirements Telnet configuration requirementsWeb configuration Web configuration TCP/IP setup Setting Up the WMISystem Login Basic Configuration Options System login screenOperation mode and Management port Dhcp serverBasic Dhcp setup LAN Review and save basic setup changes Review and save basic setup changesLine Type Advanced Configuration OptionsAnnex Type Tcpam Type Main RateSNR Margin Line ProbeVlan VID 802.1Q Tag-Based Vlan 1Q Tag-Based VlanVlan tag field 802.1Q Vlan Port-Based Vlan Port-Based VlanQuality of Service QoS QoSPort Based Priority QoS Port Based PriorityWRR Example SP Example Vlan Tag Priority QoS Vlan Tag PriorityDefault QoS Vlan Tag Priority Table Service by WRR IP Dscp PriorityQoS IP Dscp Priority WRR Configuration Shows the results of the configuration for the LAN 1 port Rate Limit Flow ControlLine Status Status OptionsManagement Status LAN Status Performance StatusSecurity Administration Administration OptionsUser Profiles Snmp Administration Remote Management HostsSnmp Administration Community PoolTrap Host Pool Remote SyslogUtility Options Configuration ToolSystem Information Upgrade UpgradeLogout RestartConsole and Telnet configuration Dhcp Server Dhcp Fixed Host DNS Proxy100 Interface commands Log in using TelnetLog in to the console interface Window structure Product name Line BridgeMain Menu Tree Menu tree for authorized usersMenu tree for unauthorized users Main screen for authorized usersEnable Command Menu Explains the commands available in the main menuSetup Command Menu LineLink ModeMaximum Main Rate Shows the options available within the lan command menu ClearVlan Mode Setup Command Menu Pvid QoS Queue ScheduleQueue Weight This setting configures the weight value for each queuePort-Based Priority QoS Queue Egress RateVlan Tag Priority QoS IP Dscp Priority QoS List RateManagement Address Management IP address and subnet maskDhcp Server Dhcp Fixed HostDNS Proxy Factory DefaultHost Name Status Command Menu LineInterface Status OutDiscardsShow Command Menu Show ScriptReboot Command Write CommandPing Command Ping Command User Profile Administration Command MenuModify/Add User Telnet TCP Port SecurityLegal IP Address Pool Snmp CommunityTrap host Please input the following informationSupervisor Password Supervisor Password and IDSupervisor ID Utility Command Menu Upgrade main softwareBackup system configuration Restore system configuration101 Exit Command Contacting Patton for assistance Warranty coverage Contact informationOut-of-warranty service Returns for creditReturn for credit policy RMA numbersAppendix a Compliance information Compliance Radio and TV interference FCC PartCE Declaration of Conformity Authorized European RepresentativeAppendix B Specifications Line Connector Ethernet ConnectorManagement Connector Line ModulationFront Panel Indicators Power SupplyDimensions WeightAppendix C Port pin-outs Console port EIA-561 RJ-45 8-pin portEthernet Line CopperLink
Top Page Image Contents