Patton electronic 2160 user manual Advanced Configuration Options, Line Type, Annex Type

Model 2160 Series User Manual 4 • Web configuration

Advanced Configuration Options

This section contains information for setting up advanced options for the Model 2160 via the WMI. Advanced setup contains Model 2160 Line, VLAN, QoS and Rate Control parameters.

Note The advanced functions are only intended for administrators to set up. The incorrect advanced settings will affect the performance of the Model 2160 or cause system errors and disconnection.

LINE

Click on LINE under Advanced on the main menu to reach the LINE advanced configuration page. You can setup the Line Type (number of wires), Annex Type, TCPAM Type, Main Rate, SNR Margin, and Line Probe settings for LINE parameters.

Figure 13. LINE page

Line Type

Select the line type for your model from the Link drop-down list. Line type means how many wires you want to use on the line side. For example, you can select 2-wire, 4-wire or 8-wire line type for the 8-wire model.

Table 7. Line Type Chart

			Line Type
		2-wire	4-wire	8-wire
Model	2160 2-wire model	•
	2161 4-wire model	•	•
Type
	2162 8-wire model	•	•	•

Annex Type

Select the appropriate Annex type from the drop-down list. Annex AF describes the transmission and perfor- mance requirements for North America. Annex BG describes performance and transmission requirements for Europe.

Advanced Configuration Options 41