Patton electronic 2160 Log in to the console interface, Log in using Telnet, Interface commands

Page 71

Model 2160 Series User Manual	5 • Console and Telnet configuration

Introduction

This chapter provides information for configuring the Model 2160 by using the serial console with Telnet.

Log in to the console interface

The console port is a RJ-48C connector that provides a connection to a PC for monitoring and configuring the Model 2160. Use the supplied serial cable with a female DB-9 connector to connect to the serial port of PC, and connect the RJ-48C module jack connector to the Model 2160's console port. Start your terminal emula- tion program (such as Hyper Terminal) and configure the communication parameters. Use the settings shown in Table 12 to log into the console:

Table 12. Console settings

Parameter	Value

Baud rate	9600
Data Bits	8

Parity Check	None
Stop Bits	1

Flow-control	None

After you enter the settings for the console, press the spacebar until the login screen appears. When you see the login screen, you can log on to the Model 2160. Enter admin for both the User Name and Password.

Log in using Telnet

The Model 2160 also supports Telnet for remote management. Connect the Ethernet cable to the Manage- ment port of Model 2160 to your computer. The Management LED on the front panel of the Model 2160 will light up. Start your Telnet client with VT100 terminal emulation and connect to the management IP of the Model 2160. Wait for the login prompt to display. Enter your user name and password. When you see the login screen, you can log on to the Model 2160. Enter admin for both the User Name and Password.

Note The default IP address is 192.168.1.1. The line command is “telnet 192.168.1.1” in DOS mode.

Interface commands

Before changing the configuration, familiarize yourself with the operations list in the following table:

		Table 13. Interface commands

	Keystroke		Description

	or I		Move to the field above in the same level menu.

	or K		Move to field below in the same level menu.

	or J		Move back to the previous menu.

	or L or [ENTER]		Move forward to the submenu.

[HOME] or U			Move to the first field.
[END] or O			Move to the last field.
[TAB]			Choose another parameter.
Ctrl + C			Quit configuring the item.
Ctrl +Q			Access help.

Introduction

71

Image 71

Contents CopperLink Model 2160 Series Mailsupport@patton.com Summary Table of Contents Table of Contents Web configuration Console and Telnet configuration LAN Vlan Port pin-outs 111 List of Figures Page List of Tables Structure About this guideAudience Impaired functioning PrecautionsTected by a circuit breaker Safety when working with electricityGeneral observations Preventing Electrostatic Discharge DamageGeneral conventions Typographical conventions used in this documentGeneral information Chapter contentsModel Model 2160 overviewLED descriptions Model 2160 front panelPort descriptions Model 2160 rear panelGround terminal Reset buttonApplications overview Typical application IntroductionDistance Chart 2160 Series Auto Mode TCPAM-32/16 Distance chartsDistance Chart Model 2160 Series Optimal Mode Distance Chart 2160 Series Optimal Mode TCPAM-128Distance Chart Model 2160 Series TCPAM-128 Distance Chart 2160 Series TCPAM-128Hardware installation Planning the installation IP related information Network diagramAC Power Mains Unpacking the Model Installing the ModelConnecting cables Location and mounting requirementsGrounding stud Grounding the Model 2160 and connecting powerTelnet configuration requirements Configuring the ModelWeb configuration requirements Console configuration requirementsWeb configuration Web configuration System Login Setting Up the WMITCP/IP setup System login screen Basic Configuration OptionsDhcp server Operation mode and Management portBasic Dhcp setup LAN Review and save basic setup changes Review and save basic setup changesAnnex Type Advanced Configuration OptionsLine Type Line Probe Tcpam TypeMain Rate SNR MarginVlan VID 1Q Tag-Based Vlan 802.1Q Tag-Based VlanVlan tag field 802.1Q Vlan Port-Based Vlan Port-Based VlanQoS Quality of Service QoSQoS Port Based Priority Port Based PriorityWRR Example SP Example QoS Vlan Tag Priority Vlan Tag PriorityDefault QoS Vlan Tag Priority Table IP Dscp Priority Service by WRRQoS IP Dscp Priority WRR Configuration Shows the results of the configuration for the LAN 1 port Flow Control Rate LimitManagement Status Status OptionsLine Status Performance Status LAN StatusUser Profiles Administration OptionsSecurity Administration Remote Management Hosts Snmp AdministrationCommunity Pool Snmp AdministrationRemote Syslog Trap Host PoolSystem Information Configuration ToolUtility Options Upgrade UpgradeRestart LogoutDhcp Server Dhcp Fixed Host DNS Proxy Console and Telnet configuration100 Log in to the console interface Log in using TelnetInterface commands Product name Line Bridge Window structureMenu tree for authorized users Main Menu TreeMain screen for authorized users Menu tree for unauthorized usersExplains the commands available in the main menu Enable Command MenuLine Setup Command MenuMaximum Main Rate ModeLink Clear Shows the options available within the lan command menuVlan Mode Setup Command Menu Pvid Queue Schedule QoSThis setting configures the weight value for each queue Queue WeightVlan Tag Priority QoS Queue Egress RatePort-Based Priority QoS IP Dscp Priority QoS Rate ListAddress Management IP address and subnet mask ManagementDhcp Fixed Host Dhcp ServerHost Name Factory DefaultDNS Proxy Line Status Command MenuOutDiscards Interface StatusShow Script Show Command MenuPing Command Write CommandReboot Command Ping Command Modify/Add User Administration Command MenuUser Profile Legal IP Address Pool SecurityTelnet TCP Port Community SnmpPlease input the following information Trap hostSupervisor ID Supervisor Password and IDSupervisor Password Restore system configuration Utility Command MenuUpgrade main software Backup system configuration101 Exit Command Contacting Patton for assistance Contact information Warranty coverageRMA numbers Out-of-warranty serviceReturns for credit Return for credit policyAppendix a Compliance information Authorized European Representative ComplianceRadio and TV interference FCC Part CE Declaration of ConformityAppendix B Specifications Line Modulation Line ConnectorEthernet Connector Management ConnectorWeight Front Panel IndicatorsPower Supply DimensionsAppendix C Port pin-outs EIA-561 RJ-45 8-pin port Console portLine CopperLink Ethernet