Patton electronic 2160 user manual Installing the Model, Location and mounting requirements

Page 30

Model 2160 Series User Manual	3 • Hardware installation

Note When setting up your Model 2160 you must consider cable-length limitations and potential electromagnetic interference (EMI) as defined by the applicable local and international regulations. Ensure that your site is properly prepared before beginning installation.

Location and mounting requirements

The Model 2160 is intended to be placed on a desktop or similar sturdy, flat surface that offers easy access to the cables. Additionally, you should consider the need to access the unit for future upgrades and maintenance.

This completes the planning phase for installation. The next section begins the installation procedures.

Installing the Model 2160

Unpacking the Model 2160

Inspect the shipping carton for external damage. Note any damage before removing the container contents. Report any equipment damage to the shipping carrier immediately for claim purposes. Save all packing mate- rial in case you need to return an item to the factory for servicing.

The Model 2160 comes with the following items:

•Model 2160 Quick Start Guide

•Model 2160

•An RJ-45-to-RJ-45 cable for use with the console and Ethernet ports

•A DB-9-to-RJ-45 (EIA-561) adapter for connecting a PC’s serial port to the Model 2160 console port

Note Power cables are shipped separately from the Model 2160

Connecting cables

The Interconnecting cables must be acceptable for external use and must be rated for the proper application with respect to volt- age, current, anticipated temperature, flammability, and

CAUTION	mechanical serviceability.

1.Connect the Ethernet cable to the Management port. Model 2160 supports audi-MDIX switching so you may use a crossover or straight-through cable.

2.Connect one end of a phone cable to the LINE port and the other end of the cable to a wall jack.

Do not work on the system or connect or disconnect cables during periods of lightning activity.

WARNING

Installing the Model 2160

30

Image 30

Contents CopperLink Model 2160 Series Mailsupport@patton.com Summary Table of Contents Table of Contents Web configuration Console and Telnet configuration LAN Vlan Port pin-outs 111 List of Figures Page List of Tables About this guide AudienceStructure Precautions Impaired functioningSafety when working with electricity Tected by a circuit breakerPreventing Electrostatic Discharge Damage General observationsTypographical conventions used in this document General conventionsChapter contents General informationModel 2160 overview ModelModel 2160 front panel LED descriptionsModel 2160 rear panel Port descriptionsReset button Ground terminalApplications overview Introduction Typical applicationDistance charts Distance Chart 2160 Series Auto Mode TCPAM-32/16Distance Chart 2160 Series Optimal Mode TCPAM-128 Distance Chart Model 2160 Series Optimal ModeDistance Chart 2160 Series TCPAM-128 Distance Chart Model 2160 Series TCPAM-128 Hardware installation Planning the installation Network diagram AC Power MainsIP related information Location and mounting requirements Installing the ModelConnecting cables Unpacking the ModelGrounding the Model 2160 and connecting power Grounding studConsole configuration requirements Configuring the ModelWeb configuration requirements Telnet configuration requirementsWeb configuration Web configuration Setting Up the WMI TCP/IP setupSystem Login Basic Configuration Options System login screenOperation mode and Management port Dhcp serverBasic Dhcp setup LAN Review and save basic setup changes Review and save basic setup changesAdvanced Configuration Options Line TypeAnnex Type SNR Margin Tcpam TypeMain Rate Line ProbeVlan VID 802.1Q Tag-Based Vlan 1Q Tag-Based VlanVlan tag field 802.1Q Vlan Port-Based Vlan Port-Based VlanQuality of Service QoS QoSPort Based Priority QoS Port Based PriorityWRR Example SP Example Vlan Tag Priority QoS Vlan Tag PriorityDefault QoS Vlan Tag Priority Table Service by WRR IP Dscp PriorityQoS IP Dscp Priority WRR Configuration Shows the results of the configuration for the LAN 1 port Rate Limit Flow ControlStatus Options Line StatusManagement Status LAN Status Performance StatusAdministration Options Security AdministrationUser Profiles Snmp Administration Remote Management HostsSnmp Administration Community PoolTrap Host Pool Remote SyslogConfiguration Tool Utility OptionsSystem Information Upgrade UpgradeLogout RestartConsole and Telnet configuration Dhcp Server Dhcp Fixed Host DNS Proxy100 Log in using Telnet Interface commandsLog in to the console interface Window structure Product name Line BridgeMain Menu Tree Menu tree for authorized usersMenu tree for unauthorized users Main screen for authorized usersEnable Command Menu Explains the commands available in the main menuSetup Command Menu LineMode LinkMaximum Main Rate Shows the options available within the lan command menu ClearVlan Mode Setup Command Menu Pvid QoS Queue ScheduleQueue Weight This setting configures the weight value for each queueQueue Egress Rate Port-Based Priority QoSVlan Tag Priority QoS IP Dscp Priority QoS List RateManagement Address Management IP address and subnet maskDhcp Server Dhcp Fixed HostFactory Default DNS ProxyHost Name Status Command Menu LineInterface Status OutDiscardsShow Command Menu Show ScriptWrite Command Reboot CommandPing Command Ping Command Administration Command Menu User ProfileModify/Add User Security Telnet TCP PortLegal IP Address Pool Snmp CommunityTrap host Please input the following informationSupervisor Password and ID Supervisor PasswordSupervisor ID Backup system configuration Utility Command MenuUpgrade main software Restore system configuration101 Exit Command Contacting Patton for assistance Warranty coverage Contact informationReturn for credit policy Out-of-warranty serviceReturns for credit RMA numbersAppendix a Compliance information CE Declaration of Conformity ComplianceRadio and TV interference FCC Part Authorized European RepresentativeAppendix B Specifications Management Connector Line ConnectorEthernet Connector Line ModulationDimensions Front Panel IndicatorsPower Supply WeightAppendix C Port pin-outs Console port EIA-561 RJ-45 8-pin portEthernet Line CopperLink