Model 2160 Series User Manual | 4 • Web configuration |
|
|
supervise and distribute IP addresses from a central point and automatically sends a new IP address when a computer is plugged into a different place in the network. The embedded DHCP server assigns network con- figuration information to 253 users (max) accessing the Internet in the same time. For example, if the LAN IP address is 192.168.0.1, the IP range of the LAN is 192.168.0.2 to 192.168.0.254.
To set up the DHCP Server for the Model 2160:
1.Click on Basic from the main menu, set up the Operation Mode and Management port, then click Next to reach the DHCP Server page.
2.The DHCP server assigns the IP from the Start IP Address to the End IP Address. The legal IP address range is from 0 to 255, but 0 is reserved as the network name and 255 is reserved for broadcast. This implies that the legal IP address range is from 1 to 254. That means you cannot assign an IP greater than 254 or less than 1.
3.A Lease Time of 72 hours indicates that the DHCP server will reassign IP information every 72 hours., which is the default value for the Model 2160. You can set up the Lease Time for a range from 1 to 720 hours according to your application.
4.If you assign a fixed IP address to a device while using DHCP, you must enter the device's MAC address in the Table of Fixed DHCP Host Entries.
5.Click Next to commit your changes and continue to the LAN page (see “LAN” on page 39).
Figure 10. Basic DHCP setup
Basic Configuration Options | 38 |