Patton electronic 2160 user manual Supervisor Password and ID, Supervisor ID

Page 99

Model 2160 Series User Manual	5 • Console and Telnet configuration

You can set up the following options:

•Version: Set to Disable, Version 1 or Version 2.

•Trap host IP address: Enter the dtrap host IP address.

•Community: Enter the community password.

Use the list command to view all SNMP trap host entries.

Supervisor Password and ID

The supervisor ID and password is the last option in the security command menu, but it is the most important menu item. Users who access the Model 2160 via a web browser or console/Telnet must use the supervisor ID and password to configure the Model 2160. You should change the supervisor ID and password after initial configuration.

	ID	Password
Web Browser	•	•
Telnet/Console		•

Supervisor Password

To change the supervisor password, move the cursor “ >>” to The default password is root.

passwd in the security menu and press Enter.

----------------------------------------------------------------------

Command: admin passwd <pass_conf>

Message: Please input the following information.

Input old Supervisor password: ****

Input new Supervisor password: ********

Re-type Supervisor password: ********

----------------------------------------------------------------------

Supervisor ID

To change the supervisor ID, move the cursor “ >>” to id in the security menu and press Enter. The default ID is root.

-----------------------------------------------------------------------------

Command: admin id <name>

Message: Please input the following information.

Legal user name (ENTER for default) <root>:

-----------------------------------------------------------------------------

Figure 47 on page 62 shows a flowchart of user access functions using the web browser or console/Telnet.

Administration Command Menu

99

Image 99

Contents CopperLink Model 2160 Series Mailsupport@patton.com Summary Table of Contents Table of Contents Web configuration Console and Telnet configuration LAN Vlan Port pin-outs 111 List of Figures Page List of Tables About this guide AudienceStructure Impaired functioning PrecautionsTected by a circuit breaker Safety when working with electricityGeneral observations Preventing Electrostatic Discharge DamageGeneral conventions Typographical conventions used in this documentGeneral information Chapter contentsModel Model 2160 overviewLED descriptions Model 2160 front panelPort descriptions Model 2160 rear panelGround terminal Reset buttonApplications overview Typical application IntroductionDistance Chart 2160 Series Auto Mode TCPAM-32/16 Distance chartsDistance Chart Model 2160 Series Optimal Mode Distance Chart 2160 Series Optimal Mode TCPAM-128Distance Chart Model 2160 Series TCPAM-128 Distance Chart 2160 Series TCPAM-128Hardware installation Planning the installation Network diagram AC Power MainsIP related information Unpacking the Model Installing the ModelConnecting cables Location and mounting requirementsGrounding stud Grounding the Model 2160 and connecting powerTelnet configuration requirements Configuring the ModelWeb configuration requirements Console configuration requirementsWeb configuration Web configuration Setting Up the WMI TCP/IP setupSystem Login System login screen Basic Configuration OptionsDhcp server Operation mode and Management portBasic Dhcp setup LAN Review and save basic setup changes Review and save basic setup changesAdvanced Configuration Options Line TypeAnnex Type Line Probe Tcpam TypeMain Rate SNR MarginVlan VID 1Q Tag-Based Vlan 802.1Q Tag-Based VlanVlan tag field 802.1Q Vlan Port-Based Vlan Port-Based VlanQoS Quality of Service QoSQoS Port Based Priority Port Based PriorityWRR Example SP Example QoS Vlan Tag Priority Vlan Tag PriorityDefault QoS Vlan Tag Priority Table IP Dscp Priority Service by WRRQoS IP Dscp Priority WRR Configuration Shows the results of the configuration for the LAN 1 port Flow Control Rate LimitStatus Options Line StatusManagement Status Performance Status LAN StatusAdministration Options Security AdministrationUser Profiles Remote Management Hosts Snmp AdministrationCommunity Pool Snmp AdministrationRemote Syslog Trap Host PoolConfiguration Tool Utility OptionsSystem Information Upgrade UpgradeRestart LogoutDhcp Server Dhcp Fixed Host DNS Proxy Console and Telnet configuration100 Log in using Telnet Interface commandsLog in to the console interface Product name Line Bridge Window structureMenu tree for authorized users Main Menu TreeMain screen for authorized users Menu tree for unauthorized usersExplains the commands available in the main menu Enable Command MenuLine Setup Command MenuMode LinkMaximum Main Rate Clear Shows the options available within the lan command menuVlan Mode Setup Command Menu Pvid Queue Schedule QoSThis setting configures the weight value for each queue Queue WeightQueue Egress Rate Port-Based Priority QoSVlan Tag Priority QoS IP Dscp Priority QoS Rate ListAddress Management IP address and subnet mask ManagementDhcp Fixed Host Dhcp ServerFactory Default DNS ProxyHost Name Line Status Command MenuOutDiscards Interface StatusShow Script Show Command MenuWrite Command Reboot CommandPing Command Ping Command Administration Command Menu User ProfileModify/Add User Security Telnet TCP Port Legal IP Address Pool Community SnmpPlease input the following information Trap hostSupervisor Password and ID Supervisor PasswordSupervisor ID Restore system configuration Utility Command MenuUpgrade main software Backup system configuration101 Exit Command Contacting Patton for assistance Contact information Warranty coverageRMA numbers Out-of-warranty serviceReturns for credit Return for credit policyAppendix a Compliance information Authorized European Representative ComplianceRadio and TV interference FCC Part CE Declaration of ConformityAppendix B Specifications Line Modulation Line ConnectorEthernet Connector Management ConnectorWeight Front Panel IndicatorsPower Supply DimensionsAppendix C Port pin-outs EIA-561 RJ-45 8-pin port Console portLine CopperLink Ethernet